Cart 2 india

Specification
Brand : ACAGALA
BulletPoint1 : The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
BulletPoint2 : Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.
BulletPoint3 : Wide selection of welding power supply: lithium battery power supply or 12V car battery.
BulletPoint4 : lithium battery power supply or 12V car battery.
BulletPoint5 : The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.With LCD display screen, can display welding parameters.
Capacity : 11 ounces
CareInstructions : Dishwasher Safe
Color : Black
IncludedComponents : Handle
ItemName : ACAGALA Portable DIY Mini Spot Welder Machine Lithium Battery Battery Various Welding Power Supply
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : ACAGALA
Material : Ceramic
ModelName : Black Coffee Mug
NumberOfItems : 1
OccasionType1 : Birthday
OccasionType2 : Christmas
OccasionType3 : New Year
PartNumber : WIE7382353762372OV
ProductDescription : Specification:
Material: Metal 
Input line length: app.20cm7.87in 
Length of welding pen: app.30cm11.81in 
Color: Red+Blue+Black 
Battery: lithium battery lithium battery(not included) 
Package Weight:20x15x3M    
Package size:210g

Noted:There are 99 gears in total. Do not exceed 50 gears, otherwise the possibility of burning will not be ruled out!

Instructions for use: 
1.Power connection 
The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong. 
2.Switch on and off 
There is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down. 
3.Screen description and parameter adjustment. 
4.Welding 
Keep the welding pin clean. If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods. 


Package Included:
1Pc x Controller
2Pcs x Welding pen
2Pcs x Power input line (Red and Blue)
1 Pair x U-shaped cold-pressed terminal
 
ProductSiteLaunchDate : 2024-11-23T12:51:09.023Z
Size : 11oz
Style : Classic
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800