Cart 2 india

Specification
Brand : GOTOTOP
BulletPoint1 : Mini Spot Welder: The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
BulletPoint2 : Automatic Touch Welding Mode: Using automatic touch welding mode, while retaining the manual interface, you can choose according to your own use.
BulletPoint3 : Wide Selection of Welding Power Supply: lithium battery power supply or 12V car battery.
BulletPoint4 : with LCD Display Screen: With LCD display screen, can display welding parameters. The controller is mainly for welding ‑plated steel strips from 0.1mm to 0.15mm.
BulletPoint5 : Handheld Welding Pen Kit: The welding pen and the input line are connected by U‑shaped cold‑pressed terminals, which is convenient for disassembly and replacement.
ExternallyAssignedProductIdentifier : 9186545888318
ExternallyAssignedProductIdentifier1 : 0708223734282
ExternallyAssignedProductIdentifier2 : 708223734282
GpsrSafetyAttestation : 1
HeatingElementType : Metal
IncludedComponents1 : 1x Pulse Argon Arc Welding Machine
IncludedComponents2 : 1x Pedestal with a Handle
IncludedComponents3 : 1x Welding Loop Clamp
IncludedComponents4 : 10x Tungsten Needles
IncludedComponents5 : All Accessories for Assembly
ItemName : GOTOTOP Portable Spot Welder with LCD Screen DIY Mini Spot Welder Spot Welding Machine Equipment Handheld Welding Pen Kit for Battery
ItemPackageDimensions_Height : 15.3 centimeters
ItemPackageDimensions_Length : 4.9 centimeters
ItemPackageDimensions_Width : 15.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : GOTOTOP
Material : Material
Material1 : Material
Material2 : Material
Material3 : Material
Material4 : Material
Material5 : Material
ModelName : Hilitandgns3uac5i8
ModelNumber : Hilitandgns3uac5i8
NumberOfItems : 1
PartNumber : GOTOTOPvcafgsg2z11058
PowerSourceType : Battery Powered
ProductDescription : Specification:
Item Type: Spot Welder
Material: Metal
Color: Red+Blue+Black 
Input Line Length: Approx.20cm / 7.87in
Welding Pen Length: Approx.30cm / 11.81in
Weight: Approx.210g/7.4oz
Battery: lithium battery(Not Included) 
Quantity: 1 Set

Instructions for use:
1: Power connection
The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong.
2: Switch on and off
There is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down.
3: Screen description and parameter adjustment.
4: Welding
Keep the welding pin . If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.

Battery Selection:
1: 12V car battery from 25 to 40ah, requires good performance and low internal resistance.
2: 4000 to 6000mAh 45C to 60C 3S model aircraft lithium battery.
3: 30 to 35ah 12V capacity lithium battery pack.

Welding Materials:
Welding 0.1~0.12mm thick -plated steel strip
Energy Setting:
Energy must gradually increase from 01, and the maximum cannot exceed 50.
Exceeding the conditions may damage the controller.

Package List:
1 x Controller
1 Pair of Welding Pen 
1 Pair of Power Input Line(Red and Blue)
1 x Power Access Plug


ProductSiteLaunchDate : 2022-03-29T11:15:48.274Z
Size : 0.15x8mmx10m
SpecificUsesForProduct : Industrial Use
Style : Pencil
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800
Voltage : 110 volts