Cart 2 india

Specification
Brand : Marhynchus
BulletPoint1 : AUTOMATIC WELDING METHOD: The controller adopts the automatic welding method. While retaining the manual trigger interface, you can choose according to your own usage.
BulletPoint2 : U-SHAPED COLD-PRESSED TERMINAL: The soldering pen and the input wire are connected through the U-shaped cold-pressed terminal, which is easy to disassemble and replace. The power board uses 2 ounces of copper, and the soldering pen wire and input wire use 10AWG multi-wire flexible wires to increase the overcurrent capability.
BulletPoint3 : The soldering pen and the input wire are connected by U‑shaped cold‑pressed terminals, which is convenient for disassembly and replacement. Its quality is guaranteed.
BulletPoint4 : Welding power can be powered by lithium battery or 12V car battery. The package includes a spot welder, a connector, two power input lines, and two soldering pens.
BulletPoint5 : WELDING -PLATED STEEL STRIP: The controller is mainly used for welding 0.1mm to 0.15mm -plated steel strip, and a 25V10000uF high-frequency low-resistance capacitor is added to the power input terminal for energy compensation to improve stability.
BulletPoint6 : The spot welder pen is small in size and light in weight, which makes it portable and convenient to use.
Color : Silver
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7016230585586
ExternallyAssignedProductIdentifier1 : 0743129626682
ExternallyAssignedProductIdentifier2 : 743129626682
ExternallyAssignedProductIdentifier3 : 0971473182657
FinishType : Finish
FinishType1 : Finish
FinishType2 : Finish
FinishType3 : Finish
FinishType4 : Finish
FinishType5 : Finish
IncludedComponents : inc
IncludedComponents1 : inc
IncludedComponents2 : inc
IncludedComponents3 : inc
IncludedComponents4 : inc
IncludedComponents5 : inc
ItemDisplayDimensions_Height : 2.3 inches
ItemDisplayDimensions_Length : 12.7 inches
ItemDisplayDimensions_Width : 5.8 inches
ItemDisplayWeight : 0.7 pounds
ItemForm : Roll
ItemName : Portable Spot Welder, Mini Spot Welder, Portable Transistor Spot Welder, Can Be Battery, Capacitor, Multiple Power Sources, Spot Welding Equipment
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : spot-welding-equipment
Manufacturer : Marhynchus
Material : Alloy Steel
Material1 : Material
Material2 : Material
Material3 : Material
Material4 : Material
Material5 : Material
Material6 : Material
Material7 : Material
Material8 : Material
Material9 : Material
ModelName : Marhynchusp01vo68ud5
ModelNumber : Marhynchusp01vo68ud5
NumberOfItems : 1
PackageLevel : unit
PartNumber : Marhynchusp01vo68ud5
PowerSourceType : PowerSource
ProductDescription : Specification:
Item Type: Mini Spot WelderProduct Description:
1: This controller is mainly used for welding small battery repair power banks, power tools, model airplanes, etc.
2: This controller requires users to have a certain electronic basis and safety awareness.3: Although sufficient protection has been done for the drive of the MOS tube, it is inevitable that the explosion tube will appear during use. If there is a explosion tube, just replace one.
4: For those with high welding requirements, please change the welding power source. After actual testing, when the battery uses 3S, 40C, 5000mHA, it can weld 0.1mm -plated steel strip and 0.15mm -plated steel strip perfectly. The welding needle needs to be ground into a round head, the pressing force is reduced, and it can also be welded; When the battery uses 12V, 50AH car level, it can weld 0.15mm -plated steel strip perfectly. Note that it is a car battery, not an ordinary -acid battery.Size: Approx. 0.1 ~ 0.15mm / 0 ~ 0.01in

Package List:
1 x Spot Welder
1 x Connector
2 x Power Input Line
2 x Soldering Pen
ProductSiteLaunchDate : 2023-12-23T00:00:00.000Z
Size : 0.15mm X 8mm 3M
StreetDate : 2015-05-14T00:00:01Z
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1