Cart 2 india

Specification
Brand : ZlxJJYY
BulletPoint1 : Microcomputer Controlled: Equipped with a microcomputer for controlling, the spot welder ensures accurate output pulse, greatly enhancing the welding quality.
BulletPoint2 : Versatile Welding Modes: Features both automatic touch welding mode and a manual trigger interface, enabling you to select the most suitable mode as per your usage.
BulletPoint3 : Diverse Power Supply Options: Operates either on lithium battery power supply or a 12V car battery, providing you with a wide selection of welding power supply.
BulletPoint4 : LCD Screen: Comes with an LCD display screen to exhibit welding parameters. Primarily designed for welding plated steel strips ranging from 0.1mm to 0.15mm.
BulletPoint5 : Advanced Design: The welding pen and input line are connected by U shaped cold pressed terminals for easy disassembly. The power board uses 2 Gusi copper for enhanced overcurrent capacity.
Color : Brown|brown
ExternallyAssignedProductIdentifier1 : 046432134791
ExternallyAssignedProductIdentifier2 : 0046432134791
ExternallyAssignedProductIdentifier3 : 00725636090118
IncludedComponents : 1 shoe handle brush
ItemDisplayWeight : 80 grams
ItemLength : 144 inches
ItemName : Portable Transistor DIY Mini Spot Welder with LCD Screen - Compact and Easy to Use Spot Welding Machine Equipment for DIY Projects and Repairs
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : spot-welding-equipment
Manufacturer : ZlxJJYY
Material : Carbon Steel
ModelName : ZlxJJYYxvkbgs13y4
ModelNumber : ZlxJJYYxvkbgs13y4
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : ZlxJJYYxvkbgs13y4
ProductDescription : Spec:
Item Type: Spot Welder
Material: Metal
Color: Red+Blue+Black
Input Line Length: Approx.20cm / 7.87in
Welding Pen Length: Approx.30cm / 11.81in
Weight: Approx.210g/7.4oz
Battery: lithium battery(Not Included)
Quantity: 1 Set
Instructions for use:
1: Power connection
The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong.
2: Switch on and off
There is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down.
3: Screen description and parameter adjustment.
4: Welding
Keep the welding pin spotless. If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.

Battery Selection:
1: 12V car battery from 25 to 40ah, requires good performance and low internal resistance.
2: 4000 to 6000mAh 45C to 60C 3S model aircraft lithium battery.
3: 30 to 35ah 12V capacity lithium battery pack.
Welding Materials:
Welding 0.1~0.12mm thick nickels-plated steel strip

Energy Setting:
Energy must gradually increase from 01, and the maximum cannot exceed 50.
Exceeding the above conditions may damage the controller.

Package List：
1 x Controller
1 Pair of Welding Pen
1 Pair of Power Input Line(Red and Blue)
1 x Power Access Plug





ProductSiteLaunchDate : 2024-08-11T08:21:31.749Z
Size : 1/2"
Style : 10Pcs 220718 Unshielded Nozzle
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23270000