Cart 2 india

Specification
Brand : ACNAO
BulletPoint1 : High Efficiency: The IGBT power tube can largely enhance the cleaning agent occupancy rate, and improve the efficiency and service life.
BulletPoint2 : Low Cost: It takes less time, is faster and has a better cleaning effect than traditional grinding and pickling treatment.
BulletPoint3 : Intelligent Adjustment: It can compensate for unstable voltage through intelligent and frequency adjustment(0-34Hz), automatically identify high and low voltage, and instantly increase the voltage to clean various degrees of yellow spots, black spots and weld spots.
BulletPoint4 : Short-circuit Protection: It has an intelligent short-circuit protection function, even if you make a mistake in the operation and trigger a short circuit, you can effectively protect the motherboard to improve the safety of use.
BulletPoint5 : Digital Display: It can be more effective in transmitting output voltage information and control functions for easy operator monitoring and management.
BulletPoint6 : Easy to Carry: Because of its lightweight (5.73lb), you can take it to work or take it home at any time.
Color : Gray and Black
IncludedComponents : 1*Welding Bead Processor 1*Advanced Handling G-u-n 1*Ground Wire Clamp 1*Silicone Positioner 4* Hairbrushes 1* Copper Head 1*English Manual All Accessories for Installation
ItemName : Welding Bead Processor, 110V 1000W Weld Cleaning Machine with Intelligent Adjustment, Spot Welding Cleaner Weld Bead Processor for Metal Arc L-a-s-e-r Welding (2.76inch Brush Hair Length)
ItemTypeKeyword : spot-welding-equipment
Manufacturer : ACNAO
Material : Metal, Plastic and Hardware
ModelName : Welding Bead Processor
ModelNumber : Welding Bead Processor
PartNumber : Welding Bead Processor
PowerSourceType : Electric
ProductDescription :

The welding bead processor is used in many modern industrial applications, such as automotive, aerospace and ship construction, and is known for its fast, accurate and safe handling performance.       As for our product, on top of the above, has several advantages such as intelligent adjustment, dual use and high-quality heat dissipation.

Details:

Fan Cooling: It has an internal fan for cooling, which can ensure that the machine can also run normally in the hot summer.

One Key Power: One key at the main power supply to turn on/off the power, no other complicated switching procedures, so you can use it more conveniently.

How to Use

Plug the power supply into AC110V, connect the g-u-n to the corresponding terminal, plug in the control line, turn on the power switch, then the power indicator (i.e. red light) is on.       Stick the processing gun with the processing liquid, press the microswitch, and wipe against the black weld bead.       After treatment, wipe with a damp cloth or water for better results

(For work such as short-circuit processing gun and workpiece, the machine will automatically disconnect the power supply to stop working, just wait 1-2 seconds can continue to work)

Application

It is suitable for metal, arc, l-a-s-e-r, etc.       It can be used for metal components of various materials and shapes, such as automobiles, aircraft, ships and other vehicles, and can also be used to clean up yellow spots, black spots, marks left by materials in the industrial process, etc.

Specification

Material: Metal, Plastic and Hardware

Process: Polishing

Color: Gray and Black

Plug Type: US Standard

Input Voltage: 110V

Output Voltage: 0-34V

Power: 1000W

Frequency Adjustment Range: 0-34Hz

Brush Hair Length: 70mm/2.76inch

Package Size: 52*19*31cm/20.47*7.48*12.2inch

Product Size: 32*15.2*26cm/12.6*5.98*10.24inch

Gross Weight: 5.2kg/11.46lb

Net Weight: 2.6kg/5.73lb

Package Included

1*Welding Bead Processor

1*Advanced Handling G-u-n

1*Ground Wire Clamp

1*Silicone Positioner

4* Hairbrushes

1* Copper Head

1*English Manual

All Accessories for Installation

Notes

1.       Wear a mask, goggles and gloves to use this machine, to prevent the treatment liquid from spraying into human eyes.

2.       Please do not switch the machine panel to connect the workpiece and the processing g-u-n line.

3.       The gun must be wrapped with processing cloth when using the copper head.

4.       Products must be used with cleaning agents (not included).

5.       Only need to replace the bristles, stainless steel head can be reused.

6.       Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2024-12-16T07:17:05.071Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800