Cart 2 india

Specification
Brand : ASMC Industrial
BulletPoint1 : Please see the specifications in the table below for full details. If you have any questions or doubts, or if your requirements include specific dimensions, please contact us prior to placing your order.
BulletPoint2 : PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot.
BulletPoint3 : ASMC Industrial Brand fasteners are guaranteed to be of the highest quality and are lot controlled, providing traceability to the manufacturer and raw material.
BulletPoint4 : The edges or the split may add extra holding power by digging into the nut.
BulletPoint5 : Split ring lock washers are used where constant vibration occurs.
Color : Silver
ExteriorFinish : Hot-Dipped Galvanized
ExternallyAssignedProductIdentifier : 1000232303992
ExternallyAssignedProductIdentifier1 : 046737877683
ExternallyAssignedProductIdentifier2 : 0046737877683
ExternallyAssignedProductIdentifier3 : 0738287095395
ExternallyAssignedProductIdentifier4 : 0014973269869
ExternallyAssignedProductIdentifier5 : 00738287095395
ItemName : 3/4" Regular Split Lockwasher Medium Carbon Steel Hot Dip Galvanized Pk 50
ItemPackageDimensions_Height : 6.858 centimeters
ItemPackageDimensions_Length : 20.574 centimeters
ItemPackageDimensions_Width : 11.176 centimeters
ItemPackageQuantity : 50
ItemTypeKeyword : spring-lock-washers
Manufacturer : ASMC Industrial
Material : Medium Carbon Steel
MetalType : Alloy Steel
MetalType1 : Carbon Steel
MetalType2 : Iron
ModelNumber : 014973269869
NumberOfItems : 50
NumberOfPieces : 50
PartNumber : 0000-115165
Pattern : solid
ProductDescription :

PRODUCT SPECIFICATIONS

Part #: 0000-115165

Fastener Type: Regular Split Lockwasher
Size Description: 3/4"
Diameter/Nominal Size: 3/4"*
Inside Diameter: 0.753-0.766"
Outside Diameter: 1.265"
MaterialThickness: 0.188"
System of Measurement: Inch
Material: Medium Carbon Steel
Finish: Hot Dip Galvanized
Average Piece Weight: 0.0400200 lbs.

*Washer Sizing: Washer sizes are nominal (sized for the bolt that the washer will fit).
Actual inside diameter is almost always larger than stated size.
Please see the Inside Diameter spec in the table above, if available.

Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut; often have an outer diameter (OD) about twice their inner diameter (ID), but this can vary based upon the washer. Washers come in many different varieties; flat washers, split lock washers, toothed lock washers, beveled washers in both steel and iron, etc.


ProductSiteLaunchDate : 2015-06-07T16:33:36.772Z
Size : 3/4"
Style : Regular Split Lockwasher
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500
WasherType : Split Lock