Cart 2 india

Specification
AgeRangeDescription : Kid
Brand : Martin
BulletPoint : This product can be widely used in hardware, mechanical transmission and other industries, with many applicable areas, and can meet most of your needs.
BulletPoint1 : Transmits torque between parallel shafts to provide rotational power to another part of a motorized system
BulletPoint2 : Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
BulletPoint3 : Diametral pitch of 12 for applications requiring a balance between transferring torque and controlling changes in speed and direction of rotation with precision
BulletPoint4 : High carbon steel for tensile strength and hardness
BulletPoint5 : Package Content: 1pcs x Pinion Gear, 2pcs x M3 Set Screws. Good pinion gear replacement for your equipment.
Color : Silver
ExternallyAssignedProductIdentifier : 6901406006983
ExternallyAssignedProductIdentifier1 : 697950440323
ExternallyAssignedProductIdentifier2 : 0697950440323
ExternallyAssignedProductIdentifier3 : 787799503331
ExternallyAssignedProductIdentifier4 : 0787799503331
ExternallyAssignedProductIdentifier5 : 0698887669252
ExternallyAssignedProductIdentifier6 : 0793631776023
IncludedComponents : Unit^Instruction Guide
ItemName : Martin TS1212BS 1/2 Spur Gear, 20° Pressure Angle, High Carbon Steel, Inch, 12 Pitch, 0.5" Bore, 1.167" OD, 1.000" Face Width, 12 Teeth
ItemPackageDimensions_Height : 1.524 centimeters
ItemPackageDimensions_Length : 8.128 centimeters
ItemPackageDimensions_Width : 6.858 centimeters
ItemPackageQuantity : 1
ItemShape : Straight
ItemTypeKeyword : spur-gears
Language : english
Manufacturer : Martin
ManufacturerMinimumAge : 8
Material : High Carbon Steel
Material1 : Plastic
Material2 : Paper
ModelNumber : TS1212BS 1/2
NumberOfItems : 1
NumberOfPlayers : 4
NumberOfTeeth : 12
PackageLevel : unit
PartNumber : TS1212BS 1/2
ProductDescription : Specifications:
Model: 0.5 Mod
Teeth: 40T
Bore Size (Shaft Diameter): 6.35mm / 0.25"
Outer Diameter (Teeth Part): 21mm / 0.83"
Effective Teeth Length: 5mm / 0.2"
Step Size: 18mm x 5mm / 0.71" x 0.2" (D*H)
Total Length: 10mm / 0.39"
Material: Brass
Hardness of Teeth Surface: Soft Teeth Surface
Package Content: 1pcs x Pinion Gear, 2pcs x M3 Set Screws


Descriptions:The brass pinion gear has strong wear resistance, high strength, high hardness and chemical corrosion resistance.
Be sure your RC motor shaft have the same diameter. Comes with set screws for each pinion gear, easy to install.
Tips: Release the motor to install the pinion. Make sure to lock it on the flat part of the motor shaft. Good pinion gear replacement for your equipment.

ProductSiteLaunchDate : 2010-11-09T00:00:01-08:00
Size : 10mm
Style : Classic
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword1 : unisex-children
TargetAudienceKeyword2 : teens, adults
TargetGender : unisex
Theme : Vintage
UnitCount : 1