Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Cutting diameter: 1.5mm / 0.06"; effective cutting length: 10mm / 0.39"; cutting edge length: 4mm / 0.16"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC55; number of flutes: 4 flutes; end cut type: square end
BulletPoint2 : Material - Made of super fine grain carbide, the end mill cutter has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
BulletPoint3 : Features - Square end cut, 4-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
BulletPoint4 : Applications - Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.
BulletPoint5 : Note - Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life.
BulletPoint6 : These End Mills are sold individually and available in many different sizes.
BulletPoint7 : 1 or 2 flutes.
BulletPoint8 : Cutter Diameters: .031", .050", .0625", .078", .0938", .125", .1875", .250", .375", .500".
Color : 4F Square Nose
CutType : Non-Center Cutting
CutType1 : Square
CutType2 : Rounded
CutType3 : Finishing
EndCutType : Square End
ExternallyAssignedProductIdentifier1 : 0755738598113
ExternallyAssignedProductIdentifier2 : 755738598113
FinishType : AlTiSin
ItemName : HARFINGTON Square Nose End Mill 4mm Shank 1.5mm x 10mm AlTiSin Coated Solid Carbide Long Reach Extended Neck 4 Flutes CNC Router Bit Milling Cutter for Stainless Steel Hardened Steel
ItemPackageDimensions_Height : 10.9 centimeters
ItemPackageDimensions_Length : 0.9 centimeters
ItemPackageDimensions_Width : 5.1 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : square-nose-end-mills
Manufacturer : HARFINGTON
Material : Tungsten Carbide
ModelNumber : hta220903hh0722
NumberOfCuttingEdges : 4
NumberOfFlutes : 4
NumberOfItems : 6
PartNumber : hta220903hh0722
ProductDescription : Made of super fine grain carbide, the end mill cutter has high hardness (HRC92), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel.
Features square end cut, 4-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
Suitable for cutting stainless steel, carbon steel, malleable cast iron, alloy steel, die steel, tool steel etc.. The clearance part is the same as the cutting diameter, specially designed for machining deep holes and deep grooves. Used for groove machining, side milling and finishing.
Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.
Notice: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2022-10-15T06:14:53.953Z
Size : 1.5mm x 10mm x 4mm x 50mm
Style : Square Nose End Mills Set
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803