Cart 2 india

Specification
Brand : Shars
BulletPoint1 : Cutting Diameter: 7/8"; Shank Diameter: 7/8"; Flute Length: 1-7/8"; Overall Length: 4-1/8"
BulletPoint2 : 4 Flutes; Single End; Center Cutting; 30-degree Helix Angle
BulletPoint3 : Right hand (clockwise rotation) cutting direction
BulletPoint4 : Have standard lengths and sized to offer good rigidity
BulletPoint5 : Spiral flute design offers a fast and smoother cutting action
Color : Black
CornerRadius : 1 centimeters
CutType : Center Cutting
CutType1 : Square
CutType2 : Finishing
CutType3 : Rounded
CutType4 : Finishing
CutType5 : Roughing
EndCutType : Square End
ExternallyAssignedProductIdentifier1 : 0000340462377
ExternallyAssignedProductIdentifier2 : 000340462377
ExternallyAssignedProductIdentifier3 : 00691781301310
FinishType : AlTiN
HandOrientation : Right
IncludedComponents : inc
ItemName : Shars 3 PCS 7/8" X 7/8" 4 HSS Flute Single End Center Cut END Mill Set 404-6237-3 ^
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 2.2 centimeters
ItemPackageDimensions_Width : 7.3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : square-nose-end-mills
Manufacturer : Shars
Material : High Speed Steel
ModelNumber : SGS 30131
NumberOfCuttingEdges : 2
NumberOfFlutes : 4
NumberOfItems : 3
PartNumber : 404-6237-3
ProductDescription : Micro Grain Solid Carbide end mill cutter offers high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, run at higher speed than high-speed steel.
Square end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Premium AlTiN (high aluminum & titanium)composite coating can increase hardness and wear resistance, and apply lubricant better for smoother milling and longer service life.
The milling bit is suitable for cutting alloy steel, stainless steel, carbon steel, cast iron, tool steel, hardened steel, great for shallow groove machining, side milling and finishing. Works with CNC machining centers, engraving machines and other high-speed CNC machine tools.
The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
Notice: Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2019-10-03T07:00:00.000Z
Size : 5.5mm x 13mm x 6mm
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Standard
UnitCount : 1
UnspscCode : 27112803
Voltage : 1 volts
Wattage : 2 watts