Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : End Mill: Cutting Diameter: 0.4mm / 0.016"; effective cutting length: 2mm / 0.08"; cutting edge length: 1mm / 0.04"; shank diameter: 4mm / 0.16"; overall length: 50mm / 2"; cutting hardness: HRC55. Used for groove machining, side milling and finishing.
BulletPoint2 : Wide Applications: Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas.
BulletPoint3 : Solid Carbide: Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
BulletPoint4 : Features: Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting.
BulletPoint5 : Tips: Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.
ExternallyAssignedProductIdentifier1 : 0789330740809
ExternallyAssignedProductIdentifier2 : 789330740809
ItemName : uxcell Square Nose End Mill, 0.4mm Solid Carbide Long Reach CNC Router Bits 2 Flutes Milling Cutter with Extended Neck, 2mm Cutting Length 4mm Shank
ItemPackageDimensions_Height : 11 centimeters
ItemPackageDimensions_Length : 1.4 centimeters
ItemPackageDimensions_Width : 5.1 centimeters
ItemTypeKeyword : square-nose-end-mills
Manufacturer : uxcell
Material : Tungsten Carbide
ModelNumber : a22041200ux0087
NumberOfFlutes : 2
PartNumber : a22041200ux0087
ProductDescription : Specifications:
Cutting Diameter: 0.4mm / 0.016"
Effective Cutting Length: 2mm / 0.08"
Cutting Edge Length: 1mm / 0.04"
Shank Diameter: 4mm / 0.16"
Overall Length: 50mm / 2"
Material: Tungsten Carbide
Finish: Uncoated
Cutting Hardness: HRC55
End Cut Type: Square End
Package Content: 1pcs x Square Nose End Mill


Descriptions:Made of fine grain carbide, it has high hardness (HRC90), high strength, and wear resistance. With good milling and cutting performance, carbide can run at higher speed than high-speed steel. The passivation treatment greatly increases corrosion resistance and wear resistance.
Suitable for cutting materials with hardness below HRC55, such as aluminum, aluminum alloy, copper, magnesium alloy, etc.. The end mill has an extended neck (long reach) that provides additional reach and clearance for machining deep or hard-to-reach areas. Used for groove machining, side milling and finishing.
Features square end cut, 2-flute design, large and spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. Features just the base substrate without any coatings, good for general purpose cutting in wide ranges of applications.
Use on CNC machining centers, CNC machine tools, precision engraving machines and other equipment. Universal chamfered round shank for easier clamping and stable cutting process.The longer the length of the tool clamped by the chuck, the better.
Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance.

ProductSiteLaunchDate : 2022-05-27T06:40:49.796Z
Size : 0.4mm x 2mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112803