Cart 2 india

Specification
Brand : Yonico
BulletPoint1 : Best for achieving a smooth finish on laminate or veneer finish applications. Cutting Diameter: 1/8" Cutting Height: 13/16" Shank Diameter: 1/4" Overall Length: 2-1/2" Flutes: 2
BulletPoint2 : For a clean CNC milled finish on both top and bottom surfaces of laminated materials and plywood
BulletPoint3 : Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
BulletPoint4 : For use on CNC and table mount routers
BulletPoint5 : Polished to a mirror finish from a solid carbide rod for precision & accuracy
ExternallyAssignedProductIdentifier1 : 0603915027133
ExternallyAssignedProductIdentifier2 : 603915027133
ItemName : Yonico CNC Compression Bit 2 Flute Spiral End Mill Router Bit 1/8-Inch Dia. 1/4-Inch Shank 33909-SC
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 9.5 inches
ItemPackageDimensions_Width : 7.25 inches
ItemTypeKeyword : square-nose-end-mills
Manufacturer : Yonico
Material : Tungsten Carbide
NumberOfFlutes : 2
PartNumber : 33909-SC
ProductDescription : Best for achieving a smooth finish on laminate or veneer finish applications. Cutting Diameter: 1/8 Cutting Height: 13/16 Shank Diameter: 1/4 Overall Length: 2-1/2 Flutes: 2 Compression bits cut down from the top of the stock and up from the bottom of the stock simultaneously. The bit's unique and complex geometry forces the trimmed material to be compressed toward the center of the stock leaving behind a smooth & sharp finish free of chips on both the top and bottom edges. This bit can also be used for mortising projects that require a smooth bottom surface without sacrificing the mortised edge finish. Highlights: - For a clean CNC milled finish on both top and bottom surfaces of laminated materials and plywood - Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool - For use on CNC and table mount routers - Polished to a mirror finish from a solid carbide rod for precision & accuracy - 2 flute design for MDF, softwoods or hardwoods Item Includes: 1 CNC Endmill Router Bit When working with any veneer finished material in your CNC machine, you need a compression spiral end mill to make full depth cut. These bits are designed to leave clean edges on the top and bottom faces of any material. The compression bit's unique design pulls chips upward at the bottom of the stock and downward at the top face, producing chip-free surfaces that are perfect for cabinet and furniture parts. Compression cut spiral end mills are excellent for melamine, plywood, MDF and solid wood.
ProductSiteLaunchDate : 2024-07-31T14:06:35.000-04:00
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 27112803