LED Stage Par Lights
Color: black
Material: aluminum
Power: 200W
Voltage: AC110V-240V 50/60Hz
Light source: 4PCS 50W RGB COB lamp beads
Channel: 3/5/8/12/14CH
Protocol: standard DMX512 protocol
Control mode: self-propelled, voice control, master-slave, DMX
Beam angle:25°
Waterproof rating:IP20
Service life:100000H
Heat dissipation mode: temperature control intelligent heat dissipation
Data Connection: Three-core XLR input/output
Display: 4-digit digital display
Protection grade: IP20
Working environment:-20℃-40℃
Product Features:
1. High power: with high light brightness, it can provide strong and bright light effect, suitable for places that need high brightness light.
2. COB technology: Adopting COB (Chip on Board) technology, which integrates multiple LED chips on a small-sized chip, making the light effect more uniform and improving the concentration and brightness of the light source.
3. Energy-saving and environmental protection:Using LED light source with lower energy consumption and long life characteristics, it is more energy-saving and environmental protection compared to traditional light fixtures, which helps to reduce energy consumption and carbon emissions.
4. Flexible control: Light adjustment and special effects switching can be performed through DMX control, realizing diversified control of light.
5.Good heat dissipation performance: The Par light has good heat dissipation performance, which effectively reduces the working temperature of the lamps and lanterns, ensures stable operation for a long time and prolongs the service life.
Installation and operating instructions:
1. Plugged into a grounded power outlet .
2. Install the equipment in a well-ventilated place at least 50cm from any surface, and ensure that the ventilation slots are not blocked.
3. Disconnect the equipment from the power supply before any operation.
4. The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Don't operate the device at higher temperatures.
5. The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.
6. Do not expose your eyes to light sources, which can be a sign of a seizure in sensitive people.
7. The lamps are only used for decoration and not suitable for ordinary household light.
8. Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a screwdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the power supply superior.
9. WARNING: Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.
10. Fix the equipment with the screw holes on the bracket to ensure that the equipment is firmly fixed to prevent vibration and movement during operation, and always check whether the structure of the equipment is strong enough to withstand equipment that is at least ten times.
11. The equipment must be fixed by professionals in places that elders and children cannot reach, and no one can pass under or over the pedestrian crossing.
12. End-of-life of the product: This sign indicates that this product should not be thrown into household waste in European Community countries and that waste should be recycled to support the sustainable recycling of resources in order to protect the environment and human health Utilize. If you need to recycle used electrical appliances, please go to an electrical appliance collection center or contact the dealer where you purchased the product to ensure the ecological recycling of the product.
13. Before cleaning the device, disconnect it from the power source if connected. Do not use harsh cleaners. Wipe off dust or dirt from the product with a clean cloth. We are not responsible for damage caused by incorrect handling, improper use or wear and tear.
14. We reserve the right to make technical modifications.
Packing list:
1. Light *2
2. Power cord *2
3. Instruction manual *1