Cart 2 india

Specification
Amperage : 8.9 amps
Brand : uxcell
BulletPoint1 : Material Thickness : 0.7mm; Material Width : 6mm/0.24inch; Spring OD : 42mm/1.65inch; Expand Length (about) : 980mm/38.58inch
BulletPoint2 : Inner Mounting Type : Hole; Outer Mounting Type : Circle，Pack with 4 x Drill Press Spring
BulletPoint3 : ☆ The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
BulletPoint4 : ☆ Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
BulletPoint5 : ☆ Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
BulletPoint6 : Drill chuck safety guard
BulletPoint7 : Large production work table gives the operator the room to work and support for the job
Color : Black
DrillType : drill_press
ExternallyAssignedProductIdentifier1 : 662755109768
ExternallyAssignedProductIdentifier2 : 662756092670
ExternallyAssignedProductIdentifier3 : 0662755109768
ExternallyAssignedProductIdentifier4 : 0662756092670
ExternallyAssignedProductIdentifier5 : 00662756092670
IncludedComponents : Drill Press Spring
IsElectric : 1
ItemName : uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 980mm Expand Long 42 x 6 x 0.7mm 4 Pcs
ItemPackageDimensions_Height : 14 centimeters
ItemPackageDimensions_Length : 1.4 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 4
ItemTorque : 4.4 newton_meters
ItemTypeKeyword : power-stationary-drill-presses
Manufacturer : uxcell
Material : Steel
Material1 : Cast Iron
Material2 : Steel
MaximumChuckSize : 0.5 inches
MaximumPower : 1 horsepower
MaximumRotationalSpeed : 5000 rpm
ModelName : J-A3816
ModelNumber : J-A3816
NumberOfItems : 1
NumberOfSpeeds : 6
PackageLevel : unit
PartNumber : a24052500ux0409
PowerSourceType : Wind Powered
ProductDescription : Description:
1.The drill press quill return spring is a good replacement for many existing quill spring drill presses, this spring will return the quill to the top after you have completed drilling and used to all kinds of vacuum cleaner coil springs, volume tube coil springs, and so on.
2. Chemical Blackening, the product's performance forms an oxide film, divide the air, and prevents rust.
3. Pay attention when installing springs. Do not loosen the wire of the fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.

Specification:
Material : Spring Steel
Finish : Chemical Blackening
Material Thickness : 0.7mm
Material Width : 6mm/0.24inch
Spring OD : 42mm/1.65inch
Expand Length (about) : 980mm/38.58inch
Inner Mounting Type : Cylindrical Bore
Outer Mounting Type : Ring
Package Content :
4 x Drill Press Spring

ProductSiteLaunchDate : 2024-06-11T10:04:03.340Z
Size : 42 x 6 x 0.7mm - 980mm Long
Speed : 5000 rpm
Style : Speed Floor Model Drill Press
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 4
Voltage : 115 volts