Cart 2 india

Specification
Brand : Oceanialend
BulletPoint1 : 【Good performance】: Low spatter tendency ensures smooth welding experience.
BulletPoint2 : 【E309L-16 Welding Rod】: Provides a weld deposit E309-16 with reduced carbon content for resistance to intergranular . for stainless steel, carbon, or low alloy steel.
BulletPoint3 : 【Suitable for various applications】: More suitable than E309-16 for carbon or low alloy steels and heat treated dissimilar joints.
BulletPoint4 : 【Important suggestions】: 0mm and 1.2mm electrodes require careful adjustment of welding machine current, not recommended for welding thin plates below 1mm. Electrodes should be baked before welding. Preferably use DC power supply with appropriate current range.
Color : as picture show
ItemName : 10PCSWelding Rod E309L-16 Stainless Steel ElectrodeWelding Rod for Stainless Stee Carbon(1.4mm)
ItemPackageQuantity : 1
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : Oceanialend
ModelNumber : BN35I704N6KFEU9324YVU5
PartNumber : BN35I704N6KFEU9324YVU5
ProductDescription :

feature:

Good performance: low spatter tendency.

describe:

E309L-16 provides a weld deposit E309-16, but with a reduced carbon content (up to 0.04%) for improved resistance to intergranular . Type E309L-16 is for for joining stainless steel to itself or to carbon or low alloy steel. E309L-16 is more suitable than E309-16 for cladding of carbon or low alloy steels and heat treated dissimilar joints.

suggestion:

-1.0mm and 1.2mm electrodes have strict requirements on the current of the welding machine and need to be adjusted slowly. It is not recommended for beginners and those who are new to welding to use thin plate welding, especially below 1mm. 1.0mm and 1.2mm electrodes are too thin for welding. It will rock back and forth. For customers with rich welding experience, if they want to weld a thin plate of about 0.5mm, they can choose a 1.4mm electrode. Please check the current range of the electrode current before , so as not to cause unnecessary trouble to both parties.

- The electrode should be baked at 300-350℃ for 1 hour before welding.

- Try to use DC power supply, the current should not be too large.

Specification:

Standard: GB/T983 E308-16 AWS E308-16

Diameter 1.4mm Length 250mm Current 16-40A

Diameter: 2.0mm Length 300mm Current: 30-55A

Diameter: 2.5mm Length 300mm Current: 50-100A

Packing list:

10PCS* electrode

Fraction:

1. Due to manual measurement, please allow 1-3mm difference, thank you for your understanding!

2. Due to the differences between different monitors, please understand that the images may not reflect the actual color of the item.

ProductSiteLaunchDate : 2024-09-29T09:04:13.771Z
Size : 1.4mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 23271800