Cart 2 india

Specification
Brand : SÜA
BulletPoint : GYS - 38 basic steel electrodes Ø 4 - waterproof case of 2 kg - 081994
BulletPoint1 : A low-hydrogen, all-position electrode for welding carbon steel, high-tensile steel, low alloy steel and free-machining steels - AWS/SFA 5.1 E7018 - AC/DC+ (Reverse Polarity)
BulletPoint2 : Quiet steady arc, low spatter, superb re-striking capabilities and high deposition efficiency all made possible by the special low-hydrogen iron powder coating and graphite tip
BulletPoint3 : Easily removable slag reveals a finely rippled bead appearance and an x-ray quality weld deposit with excellent charpy impact values at sub-zero temperatures (78 ft-lbs at -20°F)
BulletPoint4 : Typical applications include structural and fabrication steels such as I-beams, angles, plates, channels, cast steels, cold rolled steel, process piping steels and shipbuilding steels
BulletPoint5 : Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters.
Color : BLACK
CompatibleDevices : Server
ConnectorGender : Male-to-Female
ConnectorType : 4 Pin ATX
ExternallyAssignedProductIdentifier : 00840338564085
ExternallyAssignedProductIdentifier1 : 755494802677
ExternallyAssignedProductIdentifier2 : 0755494802677
GpsrSafetyAttestation : 1
IncludedComponents : electrode
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemDisplayWeight : 33 pounds
ItemForm : Rod
ItemName : SÜA - E7018 - Low Hydrogen/High Tensile - Welding Electrode/Rod - 12'' x 3/32'' (33 LB)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : MUNDAKA TECHNOLOGIES INC
Material : Iron
ModelName : GYS - 38 ELETTRODI BASICI ACCIAIO Ø 4 - ASTUCCIO IMPERMEABILE DI 2kg - 081994
ModelNumber : E7018
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : SWT-7018E12x332x33
PowerSourceType : Manual
ProductDescription : Instructions: Use this electrode with DC+ (reverse polarity), however, an AC machine with sufficient open circuit voltage may be used. Clean the weld zone of all contaminants. Bevel thick sections to a 60° Vee and preheat at 300-500°F. Set amperage to the proper range as listed on the product recommended amperage chart. Maintain a short arc length and hold the electrode at a 15° angle into the direction of travel. Weaving technique is preferred, however, do not exceed 3 times the diameter of the electrode. Do not use the whipping technique as this will cause porosity in the weld deposit. Always allow high-carbon steels to cool slowly before removing the slag.
ProductSiteLaunchDate : 2023-10-17T18:40:09.418Z
Size : 3/32" - (33 Lb)
SkipOffer : 1
SpecificationMet : CE
Style : Diameter 1.0mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 38
UnspscCode : 23271800