Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Weldcote Metals
BulletPoint : Part 00415124
BulletPoint1 : 99% Nickel Electrode
BulletPoint2 : AWS Spec: A5.15/ASME SFA 5.15
BulletPoint3 : Sold as 1# Package of Welding Rods
BulletPoint4 : Enhanced Safety: Built to meet or exceed safety standards, providing reliable protection and performance under extreme conditions.
BulletPoint5 : Cost-Effective Solution: Offers a high-quality alternative to OEM parts, delivering excellent value without compromising on performance.
Color : OEM
ExternallyAssignedProductIdentifier : 7707660850497
ExternallyAssignedProductIdentifier1 : 0877511009699
ExternallyAssignedProductIdentifier2 : 877511009699
IncludedComponents : 1Lb Package of Electrode
ItemName : Weldcote Metals 99 Nickel Stick Electrode - 1# Package (5/32" Diameter)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : arc-welding-stick-electrodes
Manufacturer : Weldcote Metals
Material : Nickel, Iron, Silicon
ModelName : Nickel 99
ModelNumber : NI99532E1P
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NI555321P
PowerSourceType : ac_dc
ProductDescription : Nickel 99 works best on castings with low or medium phosphorus contents such as thin plates, machinery parts, frames and housings. Procedure: AC or DC reverse or straight polarity. Must have clean weld area. Bevel breaks and cracks deep enough so the first pass ties in the bottom of the crack. In most cases, preheating is not necessary, but heavy sections should be preheated to approximately 400 degrees Fahrenheit. Use a short arc and stringer beads are recommended. Skip or back-step weld and peen to relieve stresses. Allow the casting to cool slowly. 1 Lb. Package
ProductSiteLaunchDate : 2017-05-12T00:00:00.000Z
Size : 5/32" Diamter
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271800