Specification Brand : WEAREONE BulletPoint1 : ✨Product name: PTFE stirrer/Magnetic stirrer (Type A /B /C) BulletPoint2 : ✨High temperature resistance: working temperature up to 250℃; Low temperature resistance: with good mechanical toughness, even if the temperature drops to -196℃, it can maintain 5% elongation. BulletPoint3 : ✨Corrosion resistance: inert to most chemicals and solvents, resistant to strong acids and alkalis, water and various organic solvents; Weather resistance: long-term exposure to the atmosphere, the surface and performance are unchanged, and the aging life is better in B068 plastic BulletPoint4 : ✨High lubrication: low friction coefficient in solid materials; Non-adhesion: has a small surface tension in solid materials, does not adhere to any substance BulletPoint5 : ✨Ptfe agitator is a necessary accessory for scientific research, petroleum, comparative analysis, national defense industrial and agricultural production departments of the laboratory, laboratory mixing solution. Color : White ExternallyAssignedProductIdentifier : 7427139738216 ExternallyAssignedProductIdentifier1 : 0760714609721 ExternallyAssignedProductIdentifier2 : 760714609721 IncludedComponents : Two teflon agitators ItemForm : Sheet ItemName : WEAREONE Magnetic Stirrer A Type B Type C Type polytetrafluoroethylene Magnetic Stirrer Rotor magnetron polytetrafluoroethylene Stirrer(8 * 50mm C) ItemPackageDimensions_Height : 8.636 centimeters ItemPackageDimensions_Length : 32.766 centimeters ItemPackageDimensions_Width : 33.02 centimeters ItemPackageQuantity : 1 ItemShape : A Type B Type C Type Ptfe Stirrer Rotor ItemTypeKeyword : science-lab-stirring-rods Manufacturer : WEAREONE Material : 8 * 50mm C MeasurementAccuracy : +/- 1% ModelNumber : JPZ-1201 NumberOfBoxes : 1 NumberOfItems : 2 PartNumber : JPZ-0021 ProductDescription : ✨Product information: Polytetrafluoroethylene and high-quality permanent magnetic steel refined, the appearance of pure white. Need to be used on asbestos mesh, do not directly contact the open flame.
✨Instructions for use: 1. Test run: place the agitator smoothly, plug in the power supply, turn on the power switch, adjust the knob clockwise after the power indicator light, you can hear the motor in the machine from slow to fast running sound, the meter indicates speed, no load can exceed 1500 RPM, in 200 RPM or less low speed, the meter indication may swing, is a normal phenomenon, after the test normal, Turn the speed down to the lowest and shut down. 2, when using: put the container in the center of the mixer, and put the mixer, so that the mixer is located in the center, you can start, adjust the knob, select the required mixing speed, speed up or slow down gradually.
✨Purchase suggestion: Type A (olive type): suitable for round bottom containers. Type B (cylindrical with joint type): suitable for flat bottom containers. Type C (cylindrical type): suitable for cylindrical containers with concave and convex bottom of the bottle with low concentration. Diameter: According to the consistency of the stirred solution to determine, if the concentration is high, try to choose a larger diameter. Length: Generally choose the length of the mixer according to 1/2 or 1/3 of the outer diameter of the container.
✨* Tips: 1, this product should be placed away from iron substances and other magnetic materials, because these materials will affect the magnetic properties of the magnetic stirrer, resulting in magnetic attenuation of the magnetic stirrer, thereby affecting the performance of the magnetic stirrer in use. 2, the container must be made of non-ferromagnetic materials, and as far as possible do not use copper and aluminum containers, the bottom must be smooth, and the thickness is not more than 10mm. ProductSiteLaunchDate : 2023-10-14T17:58:29.944Z Size : 12 Inches Diameter, Intermediate Height Style : Magnetic stirrer, teflon stirrer SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnitCount : 1 UnspscCode : 41000000