Cart 2 india

Specification
AgeRangeDescription : All
Brand : Krown
BulletPoint1 : This studded grip is designed to provide additional support and give your boots a firm grip to your board for maximum control, even in the toughest conditions.
BulletPoint2 : The studded grip has an easy peel and stick application. You can follow our setup or you can customize it to your liking or riding style.
BulletPoint3 : Apply on clean surface. Use scissors to cut studs off the sheet in any pattern you wish, just ensure to round off any sharp corners. Peel the backing off any apply firmly to the top of your snowskates foam grip. Repeat until all 90 studs have been applied (or the desired amount has been used)
BulletPoint4 : Each package includes 2 sheets of studded grip measuring, for a total of 90 studs.
BulletPoint5 : Important: Apply Krown Studded Grip at room temperature and let the grip cure for 48 hours before use.
Color : Black
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 850023423948
ExternallyAssignedProductIdentifier2 : 0850023423948
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : Snowskate Grip
ItemDisplayDimensions_Depth : 0.25 inches
ItemDisplayDimensions_Diameter : 5 inches
ItemDisplayDimensions_Height : 0.25 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 5 inches
ItemDisplayWeight : 40 grams
ItemName : Krown Snow Skate Studded Snowskate Grip - 90 Total Studs on 2 Sheets - Easy Peel and Stick Stomp Pad Style Traction
ItemPackageDimensions_Height : 22.8092 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : snowboarding-stomp-pads
Manufacturer : Krown
Material : Polyurethane (PU)
ModelName : 2023
ModelNumber : BBPG
NumberOfBoxes : 1
PartNumber : FBA-SNW-KROWN-STUD
ProductDescription : This studded grip is designed to provide additional support and give your boots a firm grip to your board for maximum control, even in the toughest conditions. The studded grip has an easy peel and stick application. You can follow our setup or you can customize it to your liking or riding style. Each package includes 2 sheets of studded grip measuring, for a total of 90 studs.

Apply on clean surface. Use scissors to cut studs off the sheet in any pattern you wish, just ensure to round off any sharp corners. Peel the backing off any apply firmly to the top of your snowskates foam grip. Repeat until all 90 studs have been applied (or the desired amount has been used)

Important: Apply Krown Studded Grip at room temperature and let the grip cure for 48 hours before use.
ProductSiteLaunchDate : 2023-11-16T21:11:10.131Z
Size : 5" x 9" (x2)
SkillLevel : All
SportType : Snow Skating
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 49000000
WarrantyDescription : 30-Day Manufacturer