Cart 2 india

Specification
Brand : Amana Tool
BulletPoint1 : Diameter (D) 7/32
BulletPoint2 : Cutting height (B) 3/4
BulletPoint3 : Shank (D) 1/4
BulletPoint4 : Overall length (L) 2
BulletPoint5 : Plywood thickness 1/4 minus 1/32
BulletPoint6 :
BulletPoint7 :
Color : Blue
CutType : Straight Cut
ExternallyAssignedProductIdentifier1 : 738685852064
ExternallyAssignedProductIdentifier2 : 0738685852064
ExternallyAssignedProductIdentifier3 : 00738685852064
ExternallyAssignedProductIdentifier4 : 00000346048872
GpsrSafetyAttestation : 1
IncludedComponents : 1 Amana Branded Tool
ItemDisplayDimensions_Height : 10 centimeters
ItemDisplayDimensions_Length : 10 centimeters
ItemDisplayDimensions_Width : 12 centimeters
ItemDisplayWeight : 500 grams
ItemName : Amana Tool - 45206 Carbide Tipped Undersized Plywood Dado Plunge 7/32 Dia x 3/4 x 1/4"
ItemPackageDimensions_Height : 11.4 centimeters
ItemPackageDimensions_Length : 0.4 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
Manufacturer : Amana Tool
Material : Carbide
Material1 : Carbide
Material2 : ABS
Material3 : Acrylonitrile But
MeasurementSystem : Metric
ModelNumber : 45206
NumberOfFlutes : 2
NumberOfItems : 8
PackageLevel : unit
PartNumber : 45206
ProductDescription :

NOTE: 

1.A little rust preventive oil deposits on the surface (looks a little dirty),is normal and doesn't affect the usage. Absolutely guaranteed to be a good quality new bits!

2.Insert the cutter shanks into the collets as deep as possible,leave 3mm or less shank showing. 

3.Before the product is received for using, check the drill bit for cracks or chips,we provide perfect after-sales service.

4.Trial cuts should be made on waste material before starting any project.

SAFETY INSTRUCTIONS:

1.Always wear dust protection mask,eye protection in the form of goggles, safety spectacles or a visor.

2.Make sure use on a router machine for which the product is applicable.

3.Please make sure that the Router Bits and router table connections is tight and avoid loosening and causing it to throw out !!!

4. Suitable for all woodworking projects for both professionals and hobbyists.

5.Always return the cutter to its packaging after use.

6.Before each use check that the cutting tool is sharp and free from damage. 

ROUTING SAFETY

1.Ensure the cutter can be used safely with the chosen router before use. Check that the cutter is fitted securely in the router collet.

2.Do not take heavy and deep cuts in one pass as this will overload the router. 

63.When stated, the speed range should be adhered to. Recommended speeds are shown in shop products descriptions.

ProductSiteLaunchDate : 2006-10-30T21:52:41-00:00
Size : 7/32 Dia x 3/4 x 1/4"
StreetDate : 2018-04-19T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111701