Cart 2 india

Specification
Brand : CMT
BulletPoint1 : 1-1/4-Inch Cutting Length, 3-1/4-Inch Length, 2 Cutting Edges.
BulletPoint2 : Smooth and precise cut. Exceptional chip ejection to allow cleaner and more constant cutting.
BulletPoint3 : To be used on wood and wood composites.
BulletPoint4 : Makes right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints.
BulletPoint5 : CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine).
Color : silver
CutType : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 664252002870
ExternallyAssignedProductIdentifier2 : 0664252002870
ExternallyAssignedProductIdentifier3 : 00664252002870
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Length : 3 inches
ItemName : CMT 812.611.11, Straight Bit, 1/2-Inch Shank, 11.1mm Diameter
ItemPackageDimensions_Height : 3.556 centimeters
ItemPackageDimensions_Length : 8.636 centimeters
ItemPackageDimensions_Width : 3.556 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
Manufacturer : CMT
Material : Carbide
ModelNumber : 812.611.11
NumberOfFlutes : 2
NumberOfItems : 1
PackageLevel : unit
PartNumber : 812.611.11
ProductDescription : This straight bit features long cutting length and overall length. It can withstand even the heaviest work load and still give you a smooth, precise cut every time. They also provide exceptional chip ejection to allow cleaner and more constant cutting. To be used on wood, wood composites for multiple applications such as right-angle joints, box joints, mortise and tenons, rabbets, union, tongue and groove joints and even more. After a test performed by Wood Magazine, CMT orange bits have been rated the first overall router bits compared to other brands. From the Manufacturer If you are looking to get the most out of your time and money through more efficient production, but want nothing less than a beautiful clean edge on your finished piece then you definitely must include CMT Straight Bits in your collection. These razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products. Made of special Fatigue Proof� steel and the best carbide, our straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time. You also get exceptional chip ejection to allow cleaner and more constant cutting. The surface of all CMT bits is protected with our trademark orange Industrial PTFE Coating to help keep the bit from collecting resin, pitch and other residue. CMT Straight Bits allow production at an industrial scale on a variety of plywoods, composites and natural woods. CMT produces 61 straight bits in almost every size you need. Safety tips: Never use damaged or worn down bits. Always work at the proper feed speed without forcing the bit. Pay particular attention when making the initial cut into the wood with a small diameter bit. For best results when working with small diameter bits, run the cut more than one time.
ProductSiteLaunchDate : 2007-04-03T00:00:00-00:00
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112800
Voltage : 5