Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 2 Flute ; 5/16" Bead Height; 7/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length
BulletPoint1 : 2-Flute Carbide Tipped; 1/2" Rabbet Depth; 1/2" Cutting Height; 1/2" Shank Diameter
BulletPoint2 : 1-1/2" Overall Diameter; BR-03 Bearing
BulletPoint3 : 1/2" Cutter
BulletPoint4 : Thread Size, 1/4-28
BulletPoint5 : Ball bearing guides on selected edging and trimming bits prevent burning and marring
CutType : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 0637881814046
ExternallyAssignedProductIdentifier2 : 637881814046
FinishType : Titanium
ItemDisplayDimensions_Height : 4.69 inches
ItemDisplayDimensions_Length : 0.25 inches
ItemDisplayDimensions_Width : 1.75 inches
ItemName : Magnate 1404 Drawing Line Carbide Tipped Router Bit - 5/16" Bead Height; 7/8" Cutting Height
ItemPackageDimensions_Height : 2.03 centimeters
ItemPackageDimensions_Length : 11.94 centimeters
ItemPackageDimensions_Width : 3.56 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
Manufacturer : Magnate
Material : Carbide
Material1 : Diamond
Material2 : High Speed Steel
ModelNumber : 22305
NumberOfFlutes : 2
PartNumber : 1404
ProductDescription : Good for decorative moldings. This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. In case a bit doesn't come with a speed chart. You may try the following suggestion. This is merely a guideline to start, result likely varies due to the varieties of edge and material hardness: Run 24,000 rpm maximum for 1" overall diameter router bits; Run 18,000 rpm maximum for 1-1/4" overall diameter router bits; Run 16,000 rpm maximum for 2-1/4" to 2-1/2" overall diameter router bits; Run 12,000 rpm maximum for 3" to 3-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2007-06-24T00:11:52.000-00:00
Size : Small
UnitCount : 1
UnspscCode : 27110000