Cart 2 india

Specification
Brand : MAGNATE
BulletPoint : 2 Flute ; 5/16" Bead Height; 7/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length
BulletPoint1 : 2-Flute Carbide Tipped; 25/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter
BulletPoint2 : 1-1/2" Shank Length
BulletPoint3 : 1/2" Cutter
BulletPoint4 : Thread Size, 1/4-28
BulletPoint5 : Ball bearing guides on selected edging and trimming bits prevent burning and marring
CutType : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier1 : 0637881710225
ExternallyAssignedProductIdentifier2 : 637881710225
FinishType : Titanium
ItemDisplayDimensions_Height : 4.69 inches
ItemDisplayDimensions_Length : 0.25 inches
ItemDisplayDimensions_Width : 1.75 inches
ItemName : Magnate 238D Straight 1/2" Shank Diameter Router Bit - 25/32" Cutting Diameter
ItemPackageDimensions_Height : 2.03 centimeters
ItemPackageDimensions_Length : 11.94 centimeters
ItemPackageDimensions_Width : 3.56 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
Manufacturer : Magnate
Material : Carbide
Material1 : Diamond
Material2 : High Speed Steel
ModelNumber : 22305
NumberOfFlutes : 2
PartNumber : 238D
ProductDescription : Straight router bits are probably the most commonly used bits for various woodworking applications such as planing edges and cutting rabbets, dadoes, grooves, or slots. When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe. This carbide tipped bit is specifically designed and manufactured for the high quality precision required by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn't come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1" overall diameter router bits; Run 20,000 rpm maximum for 1-1/2" overall diameter router bits; Run 18,000 rpm maximum for 2" overall diameter; Run 16,000 rpm maximum for 2-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2007-06-26T01:50:43.000-00:00
Size : Small
UnitCount : 1
UnspscCode : 27110000