Cart 2 india

Specification
Brand : Task
BulletPoint : Sold on Amazon
BulletPoint1 : Straight router bit with 1/4-inch heat-treated, hardened steel shank; double flute for quick cuts
BulletPoint2 : Dynamically balanced up to 24,000 RPM to reduce vibration and kickback
BulletPoint3 : Non-stick powder coat finish reduces friction and resin build-up to protect from corrosion
BulletPoint4 : Premium quality Super Fine Grain Tungsten Carbide for an exceptionally smooth finish
BulletPoint5 : Size: 1/4-inch diameter by 3/4-inch carbide height
CutType : Carbide-Tipped Cut
ExternallyAssignedProductIdentifier : 4000146461808
ExternallyAssignedProductIdentifier1 : 062466241069
ExternallyAssignedProductIdentifier2 : 0062466241069
ExternallyAssignedProductIdentifier3 : 00062466241069
ItemName : Task T24106 Straight Router Bit with 1/4-Inch Shank, 1/4-Inch by 3/4-Inch Carbide Height
ItemPackageDimensions_Height : 0.254 centimeters
ItemPackageDimensions_Length : 10.16 centimeters
ItemPackageDimensions_Width : 5.842 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : straight-router-bits
Manufacturer : Task
Material : Carbide
ModelNumber : T24106
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : T24106
ProductDescription : Straight router bits are probably the most commonly used bits for various woodworking applications such as planing edges and cutting rabbets, dadoes, grooves, or slots. When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe. This carbide tipped bit is specifically designed and manufactured for the high quality precision required by woodworking industrial applications. The cutting edges of this router bit are made from high industrial grade carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Note : In order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. Always refer to the operation manual of your router first, in the event that a router bit doesn't come with a speed chart, you may start at about 2,000 rpm slower than the maximum speed described in the chart below. Maximum speed below is for reference only, actual best performance speed varies depending on a number of factors i.e. size of the router bit, the material to be cut, etc. Run 24,000 rpm maximum for 1" overall diameter router bits; Run 20,000 rpm maximum for 1-1/2" overall diameter router bits; Run 18,000 rpm maximum for 2" overall diameter; Run 16,000 rpm maximum for 2-1/2" overall diameter router bits;
ProductSiteLaunchDate : 2012-10-30T00:00:01-07:00
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1