Cart 2 india

Specification
Brand : NXUTKBNK
BulletPoint1 : Industrial Power Supply
BulletPoint2 : HLG-240H-20 240W waterproof LED power supply for PFC street lights
Color : One Color
ExternallyAssignedProductIdentifier : 6411587160560
ItemName : NXUTKBNK HLG-240H-20 240W Waterproof LED Power Supply for PFC Street Lights
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : commercial-street-and-area-lighting
Manufacturer : NXUTKBNK
ModelNumber : NXUTKBNK
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : NXUTKBNK
ProductDescription : Industrial Power Supply
HLG-240H-20 240W waterproof LED power supply for PFC street lights
Model: HLG-240H-20
Work efficiency: 92
Power supply type: switching power supply
Full range AC input voltage (up to 305VAC)
Built-in active PFC (power factor correction) function, when the load is greater than or equal to 60%, the power factor is >0.9
Efficiency up to 94%
Fully enclosed aluminum alloy shell with glue potting
With short circuit protection/overcurrent protection/overvoltage protection/overheating protection
Constant voltage + constant current working mode
DC output range 20V, 0～12.0A
Constant current voltage range 10~20V
Output voltage accuracy ±1%
Ripple and noise 150mVp-p
Efficiency 92%
Input voltage range 90～305VAC/127～431VDC
Input surge current cold start, 75A/230V
Voltage setting range 33.5~38.5V (only type A and type C, adjusted through VoADJ)
Current setting range 3.3~6.70A (only type A and type C, adjusted through IoADJ)
<;0.75mA/240VAC
When the over-current protection output current reaches 95% ~ 108% of the set current, the constant current limit will resume.
When the over-voltage protection output is 43~49V, the output voltage is turned off and restored after restarting.
Overheating protection: shuts off the output voltage at 95℃±5℃ (TSW1) and recovers after cooling down
Start rise holding time 2500mA, 80mA, 15mA/230VAC/115VAC at full load
Insulation characteristics: between input terminal and output terminal: 3.75KVAC, between input terminal and shell: 2KVAC, between output terminal and shell: 0.5KVAC,
Operating temperature -40～+70℃ (see output load derating curve)
Vibration resistance 10～500Hz, 5G12 minutes/cycle, XYZ each axis 72 minutes each
Mean time between failures ≥ 207,900 hours, MIL-HDBK-217F (25℃)
Input wiring UL certification, SJTW 18AWG×3C (30cm) (Type A/Type B/Blank type) / Type C: Terminal block
Output wiring typ
ProductSiteLaunchDate : 2025-05-17T10:40:58.110Z
Size : HLG-240H-20
UnitCount : 1
UnspscCode : 39101900