Cart 2 india

Specification
Brand : Goulds
BulletPoint : Piston Pumps
BulletPoint1 : Dual mechanical seals. 300 series stainless steel fasteners
BulletPoint2 : Lower: SILICON CARBIDE VS. SILICON CARBIDE sealing faces. Stainless steel metal parts, BUNA-N elastomers
BulletPoint3 : Upper: CARBON VS. CERAMIC sealing faces. Stainless steel metal parts, BUNA-N elastomers
BulletPoint4 : Seal sensor probe is located in oil-filled chamber. If pump should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel
BulletPoint5 : Corrosion resistant, stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
Color : Stainless Steel
ExteriorFinish : PVC
ExternallyAssignedProductIdentifier : 6190080201993
ExternallyAssignedProductIdentifier1 : 0697666034892
ExternallyAssignedProductIdentifier2 : 697666034892
IncludedComponents : inc
ItemName : Goulds 2ED52B0EA, Submersible Effluent Pump, 2ED Series, 1/3 HP, 115 Volts, 1 Phase, 2" NPT Discharge, 70 GPM Maximum, 29 ft. Maximum Head, Cast Iron, 20 ft. Cord, Manual
ItemPackageDimensions_Height : 17.3 centimeters
ItemPackageDimensions_Length : 6.6 centimeters
ItemPackageDimensions_Width : 10.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sump-pumps
Manufacturer : Goulds
Material : Polyvinyl Chloride
Material1 : Cast Iron
Material2 : Stainless Steel
MaximumFlowRate : 70 gallons_per_minute
ModelName : Tikatarer8z69uf4ek5-12
ModelNumber : TIKATARER8z69uf4ek5-12
NationalStockNumber : 4320-01-129-5596
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 2
PartNumber : 2ED52B0EA
PowerSourceType : ac
ProductDescription :

Goulds 2ED Series Submersible Effluent Pump Dual Seal with Sensor Probe

This is a submersible effluent pump designed for most effluent systems. This pump has a maximum spherical solids handling capability of up to 3/4 of an inch and is designed for continuous use.

Features

• Dual mechanical seals
• Lower: SILICON CARBIDE VS. SILICON CARBIDE sealing faces. Stainless steel metal parts, BUNA-N elastomers
• Upper: CARBON VS. CERAMIC sealing faces. Stainless steel metal parts, BUNA-N elastomers
•  Seal sensor probe is located in oil-filled chamber. If pump should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel
• Corrosion resistant, stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation
• 300 series stainless steel fasteners
• Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer
• Class F insulation motor
• Pump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submerged
• Upper and lower heavy duty ball bearing construction
• Power and control cable are severe duty rated, oil and water resistant. 20 feet standard with optional lengths available
• O-ring assures positive sealing against contaminants and oil leakage

Applications

• Farms
• Trailer courts
• Effluent systems
• Motels
• Schools
• Hospitals
• Industry

ProductSiteLaunchDate : 2020-09-11T03:52:49.110Z
Size : US Plug 110V
Style : Effluent Pump
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40151500
ValveType : check_ball_valve
Voltage : 115 volts
Wattage : 120 watts