Cart 2 india

Specification
Brand : Little Giant
BulletPoint1 : APPLICATIONS: ideal for sump pump, dewatering and water transfer in aggressive water conditions such as briny/salty water or water from water treatment systems; handles up to 1/2-inch solids
BulletPoint2 : BUILT TO LAST: Epoxy impregnated cast bronze motor housing and cover; nylon impeller; epoxy-coated cast iron volute; Nitrile/carbon/ceramic shaft seal; Polypropylene base; rated for continuous duty
BulletPoint3 : MANUAL OPERATION: This pump does not come with a switch; if used as a sump pump or effluent pump piggyback switches can be purchased separately
BulletPoint4 : MOTOR SPECIFICATIONS: Permanent split capacitor (PSC) motor with thermal overload protection; 115 Volts; 60 Hz; 1/3 HP; 600 Watts; 5 running Amps; 14.5 starting Amps
BulletPoint5 : PUMP SPECIFICATIONS: 3180 GPH at 5-ft. lift; 28-ft. shut-off; maximum 12.1 PSI; 20-ft. cord; 27.8 lbs.
Color : Bronze
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6190076201266
ExternallyAssignedProductIdentifier1 : 010121014091
ExternallyAssignedProductIdentifier2 : 0010121014091
ExternallyAssignedProductIdentifier3 : 00022315336797
IncludedComponents1 : Manual pump with 20-ft. cord
IncludedComponents2 : Installation manual
ItemName : Little Giant 6EC-CBM 115 Volt, 1/3 HP, 3180 GPH, Manual (No Switch) Epoxy Impregnated Cast Bronze Sump/Effluent Pump for Salty/Briny Water Conditions, 20-Ft. Cord, Bronze, 506812
ItemPackageDimensions_Height : 34.29 centimeters
ItemPackageDimensions_Length : 24.384 centimeters
ItemPackageDimensions_Width : 27.94 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sump-pumps
Manufacturer : Franklin Electric Co., Inc.
Material : Cast Iron
Material1 : Bronze
Material2 : Polypropylene (PP)
MaximumFlowRate : 53 gallons_per_minute
ModelName : 6EC-CBM
ModelNumber : 506812
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 506812
PowerSourceType : Corded Electric
ProductDescription : For sump applications, the Everbilt 18 in. x 22 in. Sump Pump Basin is designed to hold a sump pump. It is ideal for basement applications where a submersible or pedestal sump pump is required. The basin is injection molded structural foam polyethylene and provides superior structural toughness and reliability. The rim of the basin includes pre-drilled holes with metal inserts to accept the mounting and securing of a cover. The cover for the basin is sold separately. The basin has a 22 Gal. capacity.
ProductSiteLaunchDate : 2024-06-28T08:00:01.000Z
Size : EW P20 2 core 9-12mm
SpecificUsesForProduct1 : Amateur
SpecificUsesForProduct2 : Professional
Style : Bronze, Manual, 20' Cord
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40151500
Voltage : 115 volts
Wattage : 600 watts