Cart 2 india

Specification
AutoPartPosition : top
Brand : Lighthouse LEDs
Brightness : 250 lumen
BulletPoint1 : 10mm 12v Pre-Wired Pink LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Ships from US)
BulletPoint2 : Size: 10mm Round Top, Color: Pink, Luminosity: 9,000-11,000 mcd
BulletPoint3 : Forward Voltage: 6-15v (15v not recommended continuous), Current: 20mA, Wavelength: N/A Pink, Operating Voltage 6-15v (15v not recommended continuous), Wire Length: Approximately 15cm (6 inches)
BulletPoint4 : Viewing Angle: 20-30 Degrees, MountStyle: Custom, Lens Color: Clear, Resistor Built In: Yes, Additional Resistor Required: No, Shrink Wrap: Yes, Mount Style: Custom
BulletPoint5 : Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc...
Color : 30k Warm White
ColorRenderingIndex : 80
ColorTemperature : 3000 kelvin
CompatibleWithVehicleType : Truck
ConnectivityTechnology : RF
ControllerType : Push Button
ControlMethod : application
ExternallyAssignedProductIdentifier1 : 653703414447
ExternallyAssignedProductIdentifier2 : 0653703414447
FitType : Universal Fit
FormFactor : Strip
IncandescentEquivalentWattage : 25 watts
IndoorOutdoorUsage : indoor
ItemName : 10mm 12v Pre-Wired Pink LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 20)
ItemPackageDimensions_Height : 15.4 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 8.2 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : super-luminescent-leds
LightColor : Warm White
LightType : LED
Manufacturer : Lighthouse LEDs
Material : lead
Material1 : Plastic
Material2 : Metal
ModelName : LED G9 Lamp Light Bulb,
ModelNumber : 20X12V10MMPREWIREDPINK
NumberOfItems : 6
NumberOfPieces : 20
PartNumber : 20X12V10MMPREWIREDPINK
PowerConsumption : 2.5 watts
PowerSourceType : Corded Electric
ProductDescription :

Our pre-wired LEDs are nothing but quality. The 12v 10mm pink led puts out a nice color that is sure the illuminate your product or project. Our 10mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power / ground and they will illuminate. It doesn't get much easier than that.

The 10mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.

This single setup works well with the following voltages (you don't have to select a voltage when ordering): 10v, 11v, 12v, 13v, 14v and 15v. We recommend that you don't continuously run them at 15 volts, but they will take spikes as high as that without any issues at all. If you are looking for a lower voltage setup then take a look at our 9v or 6v setups that will cover the remainder of voltage ranges below 10v.

ProductSiteLaunchDate : 2020-05-13T08:00:01.000Z
Size : 20 Piece
SpecificationMet1 : CE
SpecificationMet2 : RoHS
SpecificationMet3 : ETL
SpecificUsesForProduct1 : Track Lighting
SpecificUsesForProduct2 : Lamp
SpecificUsesForProduct3 : Chandelier
SpecificUsesForProduct4 : Wall Sconces
SpecificUsesForProduct5 : Ceiling Fixtures
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 20
UnspscCode : 32111500
Voltage : 120 volts
WarrantyDescription : See packaging for details.
Wattage : 2.5 watts
WhiteBrightness : 250 lumens