Cart 2 india

Specification
Brand : Lighthouse LEDs
BulletPoint1 : Super Bright 12v 5mm Yellow Pre-Wired LED (Ships from US)
BulletPoint2 : Works well in automotive applications (12v charging system) 10-15v (not recommended 15v continuous)
BulletPoint3 : Resistor built in to the pre-wired unit - Simply hook up power/ground for it to light
BulletPoint4 : Shrink wrapped connections with approximately 15cm (6 inches) of wire lead
BulletPoint5 : 20mA, 10,000-12,000 MCD, 600-610nm Wavelength, Clear Lens, 20-30 Degree Viewing Angle
Color : Golden
ConnectivityTechnology : RF
ControllerType : Remote control
FitType : Universal Fit
FormFactor : Strip
ForwardCurrent : 20 milliamps
IncludedComponents : fixing ring
ItemDisplayWeight : 0.04 pounds
ItemName : 5mm 12v Pre-Wired Yellow/Gold LED - Ultra Bright (10v, 11v, 12v, 13v, 14v, 15v) (Pack of 10)
ItemPackageDimensions_Height : 1.97 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 5.91 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : super-luminescent-leds
LightColor : Yellow
LightType : LED
Manufacturer : Lighthouse LEDs
Material : gold
MinimumVoltage : 10 volts
ModelNumber : 10X12V5MMPREWIREDYELLOW
NumberOfItems : 10
NumberOfPieces : 10
NumberOfPins : 2
PartNumber : 10X12V5MMPREWIREDYELLOW
ProductDescription : Our pre-wired LEDs are nothing but quality. The 12v 5mm yellow gold led puts out a nice color that is sure the illuminate your product or project. Our 5mm pre-wired leds have built in resistors so that they will work with the voltage that they are rated for. There is no need for you to add any additional resistors. The only thing you need to do is add power ground and they will illuminate. It doesn't get much easier than that.The 5mm pre-wired leds come with a built in resistor, all connections are heat shrinked in order to protect them and there is sufficient wire lead on all of them.This single setup works well with the following voltages (you don't have to select a voltage when ordering): 10v, 11v, 12v, 13v, 14v and 15v. We recommend that you don't continuously run them at 15 volts, but they will take spikes as high as that without any issues at all. If you are looking for a lower voltage setup then take a look at our 9v or 6v setups that will cover the remainder of voltage ranges below 10v.
ProductSiteLaunchDate : 2015-02-05T21:58:20.960Z
Size : 10 Piece
SpecificUsesForProduct : Halloween
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 32111500
WavelengthRange : 600-610nm