Cart 2 india

Specification
Brand : Larson Electronics
BulletPoint : 200PCS/LOT SMD 0805 Blue Light Beads 0805 smd led Blue Light-emitting Diode LED Chip 2.0*1.2*0.8mm
BulletPoint1 : Contact us today for information about custom options tailored to meet your specific needs
BulletPoint2 : For safety reasons, we cannot accept returns on any hazardous location, explosion proof or intrinsically safe products.
BulletPoint3 : Once these products leave the factory, we must re-build and re-certify the units to specification to ensure every unit sold is safe to use.
BulletPoint4 :
BulletPoint5 :
ControllerType : Push Button
ExternallyAssignedProductIdentifier : 5602528724212
FixtureType : Non Removable
ItemName : Larson Electronics 21 Watt Class 1 Division 1 LED Light - Vapor Proof and Explosion Proof - 120-277VAC - 9-32VDC - Ceiling Mount - 120-277V AC - 6000K
ItemPackageDimensions_Height : 10 inches
ItemPackageDimensions_Length : 20 inches
ItemPackageDimensions_Width : 20 inches
ItemPackageQuantity : 1
ItemTypeKeyword : surface-emitting-leds
LightFixtureForm : ceiling
Manufacturer : Larson Electronics LLC
Material : Heavy Cast Aluminum
ModelNumber : 64352
MountingType : Ceiling Mount
NumberOfItems : 1
NumberOfLightSources : 1
PartNumber : 64352
ProductDescription : Made in the USA The Explosion Proof LED Light from Larson Electronics is UL rated Class I Division 1, Groups C and D and paint spray both approved. Waterproof and IP67 rated, this explosion proof LED light is available in pendant, ceiling, or wall mount options. This effective and durable explosion proof LED light from Larson Electronics is approved for use in paint spray booths and is ideal for industrial applications, hazardous work spaces, and areas where gases, vapors and dusts may be present and an effective and durable hazardous location light solution is needed. This lamp can be equipped with seven Edixeon 3 watt LED emitters to provide a variety of brightness and power options. The lamp housing is waterproof, constructed of heavy cast aluminum, and UL tested to withstand 1490 lbs. per square inch of hydrostatic pressure. Factory sealed and finished in a durable polyester powder coating, this lamp can be ordered with a choice of mounting options and can be configured to operate with 120-240V AC 50/60hz. This fixture is also available in an optional low voltage 9-32 volts DC. This hazardous area light carries a T3C temperature rating and is UL Listed Class I Groups C and D, Class II Groups E and F(T3 rating), and Class III, Groups E, F and G. This light is IP67 rated waterproof and suitable for use in paint spray booths and areas where flammable gases, vapors and chemicals may be encountered as well as approved for exposure to combustible dusts. NOTE: To retain paint booth approval requirements, only lamps of 150 watts or lower be used with this unit. At 21 watts, this LED unit is far below the 150 watt limit. The cast aluminum housing is fully factory sealed and includes an integrated inspection hole for easy access to the splice compartment. Wiring is through a 3/4" hub. The Edixeon LEDs offer inherent LED resistance to shocks and vibrations, contributing to these units 15.6Grms rating of vibration tolerance and offer an outstanding life hours of 50,000+.
ProductSiteLaunchDate : 2024-04-26T19:03:30.269Z
RoomType : Explosion Proof
Style : Industrial
SwitchType : Temperature switch
UnitCount : 1
UnspscCode : 39110000