Cart 2 india

Specification
Brand : YFYIQI
BulletPoint : For Mitutoyo 12AAB407 Styli for Surface Roughness Measurement Deep Groove Stylus
BulletPoint1 : Range: 0～2000μm (0-6500μm adjustable)
BulletPoint2 : Accuracy: ±2μm
BulletPoint3 : Metric/Inch change freely
BulletPoint4 : It can be used to measure the height of the peak to the bottom of the sprayed surface. It can also measure the depth of c-o-r-r-o-s-i-o-n pits and cracks.
BulletPoint5 : Comply with ISO8503, ASTMD4417-B, IMO MSC.215(82), SANS5772,US Navy NSI 009-32, US Navy PPI 63101-000 standard
ExternallyAssignedProductIdentifier1 : 0763508570689
ExternallyAssignedProductIdentifier2 : 763508570689
IncludedComponents : Surface Profile Gauge
ItemName : YFYIQI Anchor Pattern Tester Sand Blast Meter for Detecting Roughness with Measuring Range 0 to 2000μm Accuracy ±2μm Metric/Inch Two Units Switchable
ItemPackageDimensions_Height : 15 centimeters
ItemPackageDimensions_Length : 25 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemTypeKeyword : surface-roughness-gauges
Manufacturer : YFYIQI
MeasurementAccuracy : High
ModelNumber : 2024110103
NumberOfItems : 1
PartNumber : 2024110103
ProductDescription : YFYIQI Anchor Pattern Tester Sand Blast Meter for Detecting Roughness with Measuring Range 0 to 2000μm Accuracy ±2μm Metric/Inch Two Units Switchable

Overview:

The Surface Profile Gauge are generally refers to the instrument for detecting roughness. The instrument is simple to use and measures the height of the peak to the bottom of the sprayed surface. It can also measure the depth of c-o-r-r-o-s-i-o-n pits and cracks.

A zero calibration block is provided. The correct and effective pre-treatment of the surface of the substrate before coating is very important. If the roughness is too low, it will reduce the adhesion of the surface coating, and if it is too high the surface peaks will leave uncoated areas and cause rust, so measuring the roughness of the substrate becomes an indispensable part before pre-treatment the sample to ensure the correct roughness. The 0918 Surface Profile meter (sand blast meter) is used to assess whether the painting requirements are met. The first choice for this type of measurement supervision and acceptance.

Specification:

Comply with ISO8503, ASTMD4417-B, IMO MSC.215(82), SANS5772,US Navy NSI 009-32, US Navy PPI 63101-000 standard

Only need a very small measuring area

Range: 0～2000μm (0-6500μm adjustable)

Accuracy: ±2μm

Metric/Inch change freely

Standard Package:Host 1pc; Calibration piece 1pc; Allen wrench 1pc; Battery 2pc, Screwdriver 1pc, Packing box 1pc.
ProductSiteLaunchDate : 2024-10-31T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41113700