Cart 2 india

Specification
Brand : Hansen Hobbies
BulletPoint1 : Works with all Ubiquiti Unifi Bullet cameras (G3, G4, G5, G6, AI, and Pro variants)
BulletPoint2 : Provides 40 degrees of angle to aid in certain mounting situations & prevents pinching of ethernet cable
BulletPoint3 : 3D Printed from durable, weather & UV resistant ASA plastic
BulletPoint4 : Stainless steel screws included
BulletPoint5 : Must be used with the mounting base that comes with the Unifi Bullet cameras
BulletPoint6 : Designed and manufactured in the USA
BulletPoint7 : Camera and camera mounting plate NOT included
Color : White
CompatibleDevices : Cameras
GpsrSafetyAttestation : 1
IncludedComponents : Plastic mount, screws
IncludedComponents1 : Eave Mount
IncludedComponents2 : Install hardware
ItemName : Hansen Hobbies Low Profile Angle Mount Base for Unifi Bullet Cameras (G3, G4, G5, G6, Pro, AI) (White)
ItemPackageDimensions_Height : 8.509 centimeters
ItemPackageDimensions_Length : 4.9022 centimeters
ItemPackageDimensions_Width : 5.9944 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : surveillance-camera-housings-and-mounting-equipment
Manufacturer : Hansen Hobbies
Material : Metal
ModelName : Universal Pole Mounting Bracket
ModelNumber : HF0421
MountingType : Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : HH-UU-LPBulletAngleMount
ProductDescription :

This is a low profile angled camera mount that is compatible with the Unifi series of bullet cameras, including the G3, G4, G5, G6 (all Bullet and Pro variants), and AI.

The mounting base features a 40 degree bend which helps angle the camera when mounting under surfaces such as soffits and ceilings.

The mount is designed for the cable to come through the mounting surface and be totally hidden, but there are also three paths provided to route the cable in through the side of the mount (drilling required).

The two sets of mounting holes are to accommodate both the older and newer style base plates that come with the Unifi bullet cameras (G3 Bullets had a different hole spacing than the new G5 Bullets).

These mounts are heavy duty and use thick impact resistant plastic.  Stainless steel screws are provided for attaching the camera base and attaching the plastic mount to your surface.  If you are attaching to drywall or masonry then you will need to supply plastic wall anchors.

These are 3D printed ASA parts which we make in-house (so you can expect some small aesthetic imperfections).  ASA is an outdoor plastic with excellent weather and UV resistance (unlike many other plastics being used for 3D printing).  ASA also accepts paint nicely, which will be useful if you plan to paint these to match your house colors.  We suggest using a spray paint primer before painting.

ProductSiteLaunchDate : 2025-03-25T05:46:56.659Z
Size : 4.72 x 3.94 x 2.13 Inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 45121600
WarrantyDescription : 1 Year Manufacturer
WaterResistanceLevel : water_resistant