Cart 2 india

Specification
AgeRangeDescription : adult
Brand : CHANCS
BulletPoint : Filters
BulletPoint1 : 775 Motor AB Phase Hall Magnetic Encoder is a high performance, low cost, two channel incremental Type magnetic encoders, suitable for any harsh environment, each magnetic encoder contains a magnetic grid And a magneto-sensitive detection circuit that outputs two channels with a quadrature phase angle of 90° square wave.
BulletPoint2 : 【Size:】 Shaft diameter: 5mm; Resolution: 16PPR; Working frequency:100KHZ; According to the motor diameter size and spindle size production, The PCE plate and the motor are equipped with sensors, the tail electrode is welded and fixed, and the magnetic grid is set on the tail shaft.
BulletPoint3 : 【Motor installation requirements:】Dual-axis DC motor, tail shaft length > 8mm, motor end piece length > 1mm.
BulletPoint4 : 【Package:】1×Encoder
BulletPoint5 : 【Note:】 1. Each set of magnetic encoder contains a magnetic grid and magnetic sensitive detection circuit, DC motor and control circuit are not included. 2. Pay attention to the wiring of the encoder, if the wrong connection will cause the chip to burn. 3. The actual product shall prevail.
Color : One Color
ExternallyAssignedProductIdentifier : 7364640028590
IncludedComponents : NO
ItemName : CHANCS Permanent Magnet DC 775 Motor Resolution 16PPR AB Phase Hall Magnetic High Precision Encoder Brush Motor Encoder
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 5.1 centimeters
ItemPackageDimensions_Width : 8.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : switch-encoders
Manufacturer : CHANCS MOTOR
Material : iron
ModelName : NOVKMJVZ
ModelNumber : 16PPR AB
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 181051600
ProductDescription : 【Description：】
775 Motor AB Phase Hall Magnetic Encoder is a high performance, low cost, two channel incremental
Type magnetic encoders, suitable for any harsh environment, each magnetic encoder contains a magnetic grid And a magneto-sensitive detection circuit that outputs two channels with a quadrature phase angle of 90° square wave.

【Size:】
Shaft diameter: 5mm;
Resolution: 16PPR;
Working frequency:100KHZ;
According to the motor diameter size and spindle size production,
The PCE plate and the motor are equipped with sensors, the tail electrode is welded and fixed, and the magnetic grid is set on the tail shaft.

【Motor installation requirements:】
Dual-axis DC motor, tail shaft length > 8mm, motor end piece length > 1mm.

【Package:】
1×Encoder

【Note:】
1. Each set of magnetic encoder contains a magnetic grid and magnetic sensitive detection circuit.
DC motor and control circuit are not included.
2. Pay attention to the wiring of the encoder, if the wrong connection will cause the chip to burn.
3. The actual product shall prevail.


ProductSiteLaunchDate : 2022-05-12T06:48:04.472Z
Size : 16PPR AB
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39120000