Cart 2 india

Specification
AgeRangeDescription : adult
Brand : FENAC Automation Control
BulletPoint : Filters
BulletPoint1 : 775 Motor AB Phase Hall Magnetic Encoder is a high performance, low cost, two channel incremental Type magnetic encoders, suitable for any harsh environment, each magnetic encoder contains a magnetic grid And a magneto-sensitive detection circuit that outputs two channels with a quadrature phase angle of 90° square wave.
BulletPoint2 : 【Size:】 Shaft diameter: 5mm; Resolution: 16PPR; Working frequency:100KHZ; According to the motor diameter size and spindle size production, The PCE plate and the motor are equipped with sensors, the tail electrode is welded and fixed, and the magnetic grid is set on the tail shaft.
BulletPoint3 : 【Motor installation requirements:】Dual-axis DC motor, tail shaft length > 8mm, motor end piece length > 1mm.
BulletPoint4 : 【Package:】1×Encoder
BulletPoint5 : 【Note:】 1. Each set of magnetic encoder contains a magnetic grid and magnetic sensitive detection circuit, DC motor and control circuit are not included. 2. Pay attention to the wiring of the encoder, if the wrong connection will cause the chip to burn. 3. The actual product shall prevail.
Color : One Color
ExternallyAssignedProductIdentifier : 7364640028590
IncludedComponents : NO
ItemName : Fenac FNC 50S 6630V200-R2 Incremental Encoder 50mm Body Diameter, Servo Flange, 8mm Solid Shaft, 6 Channel, 5-30V in/Out, 200PPR, 2m Cable
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 5.1 centimeters
ItemPackageDimensions_Width : 8.3 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : switch-encoders
Manufacturer : FENAC Automation Control
Material : iron
ModelName : NOVKMJVZ
ModelNumber : 16PPR AB
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : FNC 30S 6630V1024-R2
ProductDescription : 【Description：】
775 Motor AB Phase Hall Magnetic Encoder is a high performance, low cost, two channel incremental
Type magnetic encoders, suitable for any harsh environment, each magnetic encoder contains a magnetic grid And a magneto-sensitive detection circuit that outputs two channels with a quadrature phase angle of 90° square wave.

【Size:】
Shaft diameter: 5mm;
Resolution: 16PPR;
Working frequency:100KHZ;
According to the motor diameter size and spindle size production,
The PCE plate and the motor are equipped with sensors, the tail electrode is welded and fixed, and the magnetic grid is set on the tail shaft.

【Motor installation requirements:】
Dual-axis DC motor, tail shaft length > 8mm, motor end piece length > 1mm.

【Package:】
1×Encoder

【Note:】
1. Each set of magnetic encoder contains a magnetic grid and magnetic sensitive detection circuit.
DC motor and control circuit are not included.
2. Pay attention to the wiring of the encoder, if the wrong connection will cause the chip to burn.
3. The actual product shall prevail.


ProductSiteLaunchDate : 2020-06-08T15:00:12.851Z
Size : 16PPR AB
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111500