Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Signswise
BulletPoint1 : Model: incremental rotary encoders, AB two phases.
BulletPoint2 : Light weight and small size. Easy installation. Cost-effective features.
BulletPoint3 : 600P/R-600 pulses per revolution. By rotating the grating disk and optocoupler direction, this incremental optical rotary encoder generate counting pulses.
BulletPoint4 : Suitable for a variety of intelligent control of automatic guillotine paper machine, civilian measured height human scale, students racing robots and steel cut length control etc.
BulletPoint5 : 12-MONTH Worry-Free Return And Refund Policy, Buy with Confidence!
BulletPoint6 : Product 2: Measures temperature from -40 to +500 degrees F (-40 to +260 degrees C)
BulletPoint7 : Product 2: 4.5" probe has a 1/8" diameter for reduced impact
BulletPoint8 : Product 2: Response time of 4 seconds in liquid for fast readings
CareInstructions1 : Wipe Clean
CareInstructions2 : Freezer Safe
Color : 5V-Voltage
ExternallyAssignedProductIdentifier1 : 714676469084
ExternallyAssignedProductIdentifier2 : 0714676469084
ItemLength : 7.125 inches
ItemName : Signswise Incremental Optical Rotary Encoder for Arduino 600P/R Wide Voltage Power Supply DC 5-24V 6mm Shaft Quadrature
ItemPackageDimensions_Height : 10.3124 centimeters
ItemPackageDimensions_Length : 7.3914 centimeters
ItemPackageDimensions_Width : 8.3058 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : switch-encoders
Manufacturer : Signswise
Material : Aluminum
MeasurementType : RPM
MinimumOperatingVoltage : 5 volts_of_direct_current
ModelNumber : LN11-ERGA
NumberOfItems : 1
PartNumber : LN11-ERGA
PowerSourceType : Dc Power Supply
ProductDescription : Functions
√ This incremental optical rotary encoder can be used to measure the rotational speed, angle and acceleration of the object and the length measurement.
√ This shaft encoder is suitable for a variety of intelligent control displacement measurement, automatic fixed- length automatic guillotine paper machine, steel cut length control, civilian measured height human scale, students racing robots.

Specification
-Encoder size: 38 x 35.5mm/1.49" x 1.39"
-Shaft: 6 x 13mm/0.23" x 0.51"
-Axis stopper platform: High 5mm, 20mm
-Power source: DC 5-24V
-Maximum mechanical speed: 5000 R / min
-Response frequency: 0-20KHz
-Fixed empty as: three 3mm screw holes distribution of 120 degrees / or six 3mm screw holes into 60 degree distribution, to the center distance of 14mm.
-Wires length: 150cm

Wiring Output:
A phase, B phase, Vcc positive supply, V0, the shield wire.

Connection:
Green = A phase, white = B phase, red = power +, black = V0
Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor.

Output
AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ,the output of this type can and with additonal added pull-up resistor(not included) is directly connected MCU or PLC, such as 51 single or Mitsubishi PLC (PLC input mode should be connected to 0V switch function ).

Note:
If the encoder is not connected to the device can not be directly connected to oscilloscope ( open collector output without pull-up resistor when there is no voltage output) If you want the oscilloscope in AB two-phase output, work with two pull-up resistors(not included).

Package content
1 x 600P/R Incremental Rotary Encoder
ProductSiteLaunchDate : 2015-03-17T07:00:00.000Z
Reusability : Reusable
Size : 600P/R
SpecificationMet1 : RoHS
SpecificationMet2 : CE
SpecificationMet3 : NIST
Style : 600 P/R
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41113600