Cart 2 india

Specification
AgeRangeDescription : adult
Brand : Multizenic
BulletPoint1 : High Precision Measurement: The 4-digit LED Tachometer offers quick response and high precision RPM speed measurement, ensuring accurate readings up to 9999rpm for your motor.
BulletPoint2 : Wide Supply Voltage: With a wide supply voltage range of 8-24V, this tachometer is suitable for various applications, providing stable and performance.
BulletPoint3 : Clear LED Display: The 0.56-inch green LED screen clearly displays RPM readings, allowing you to easily monitor your motor's speed at a glance.
BulletPoint4 : NPN Hall Proximity Switch: Comes with a 3-wire NPN Hall Proximity Switch Sensor for enhanced functionality and ease of use in your applications.
BulletPoint5 : Complete Package: Includes 1 LED Tachometer, 1 Hall Proximity Switch, 1 Round Magnet, and 1 Cable, providing you with all the necessary components for a seamless installation.
Color : One Color
ExternallyAssignedProductIdentifier : 9103130096279
ItemName : Green 4 Digit LED Motor Tachometer, High Precision RPM Speed Measure Meter, with NPN Hall Proximity Switch Sensor, Wide Supply Voltage 8 24V, Stable and for Various APPL
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-tachometers
Manufacturer : Multizenic
ModelName : Multizenic1sirwgcuvh
ModelNumber : Multizenic1sirwgcuvh
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Multizenic1sirwgcuvh
ProductDescription : Item Type: Tachometer
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in

Package List：
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable

Note:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter and the clear input switch or circuit should be as close as possible to the terminals of the counter to make the line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to miscount, magnetic switch is strong recommended.


ProductSiteLaunchDate : 2024-12-20T04:23:42.845Z
Size : One Size
UnitCount : 1
UnspscCode : 42181801