Cart 2 india

Specification
Brand : Tnfeeon
BulletPoint1 : [QUICK RESPONSE TIME] - Enjoy a high precision, stable, and tachometer that updates the display over 3 times per second.
BulletPoint2 : [WIDE VOLTAGE COMPATIBILITY] - Operate the tachometer with 8-24V supply voltage, making it versatile for different RPM speed measurements.
BulletPoint3 : [COMPLETE PACKAGE] - Includes an LED tachometer, Hall proximity switch, round magnet, and cable for a convenient setup.
BulletPoint4 : [HIGH-PRECISION RPM MEASUREMENT] - Get accurate RPM readings with ±0.1% measuring accuracy, suitable for various applications.
BulletPoint5 : [BRIGHT 4-DIGIT LED DISPLAY] - The 0.56inch green LED screen clearly shows RPM readings up to 9999rpm for quick and easy monitoring.
ItemName : LED Motor Tachometer RPM for High Precision Measurement 10-9999rpm, NPN Hall Proximity Switch Sensor for Various Applications (speedometer)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : industrial-tachometers
Manufacturer : Tnfeeon
ModelName : Tnfeeonw02sogh9mp-11
ModelNumber : Tnfeeonw02sogh9mp-11
PartNumber : Tnfeeonw02sogh9mp-11
ProductDescription : 1. 0.56inch 4‑digit LED screen clearly display RPM readings in green.
2. Come with 3 wire NPN Hall Proximity Switch Sensor.
3. speed measurement up to 9999rpm.
4. High precision, quick response, stable and .
5. 8‑24V wide supply voltage, suitable for various applications of RPM speed measurement.

Specification:
Item Type: Tachometer
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in

Package List:
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable

Notice:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter and the clear input switch or circuit should be as close as possible to the terminals of the counter to make the line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better
ProductSiteLaunchDate : 2025-01-10T05:10:13.822Z
Size : speedometer
UnspscCode : 53121600