Cart 2 india

Specification
Brand : Yctze
BulletPoint1 : 0.56inch 4-digit LED screen clearly display RPM readings in green.
BulletPoint2 : IMPORTANT PARAMETER:This is a digital tachometer with measuring range of 10-9999RPM, power supply is 8-24V, measuring accuracy is ±0.1%.
BulletPoint3 : 【DIGITAL LED TACHOMETER】Come with 3 wire NPN Hall Proximity Switch Sensor
BulletPoint4 : Come with 3 wire NPN Hall Proximity Switch Sensor.
BulletPoint5 : SATISFACTION SERVICE: The Hall switch and the motor need to be fixed with brackets. The more stable the fixing, the more conducive to stable detection.
Color : Black
ItemName : Yctze 4-Digit Green LED Motor Tachometer – RPM Speed Measure Meter with NPN Hall Proximity Switch Sensor for Machinery and Contactless Spindle (speedometer)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-tachometers
Manufacturer : Yctze
Material : Acrylonitrile Butadiene Styrene (ABS)
ModelName : Yctzerg23qwdo91-11
ModelNumber : Yctzerg23qwdo91-11
NumberOfItems : 1
PartNumber : Yctzerg23qwdo91-11
ProductDescription : 1. 0.56inch 4-digit LED screen clearly display RPM readings in green.
2. Come with 3 wire NPN Hall Proximity Switch Sensor.
3. Revolution speed measurement up to 9999rpm.
4. High precision, quick response, stable and reliable.
5. 8-24V wide supply voltage, suitable for various applications of RPM speed measurement.

Specification:
Item Type: Tachometer
Operating Voltage: DC 8-24V, 40mA
Display: 0.56inch green LED, 4 digit reading
Measuring Range: 10-9999rpm
Measuring Accuracy: ±0.1%, reading±1digit
Display Refresh Rate: >3 times/sec
Overrange Display: Display 1 or -1 in the first digit position, none in the last three digit positions
Hall Proximity Switch Type: NPN NO
Tachometer Size: 79x26x43mm / 3.11x1.02x1.69in

PackageList:
1 x LED Tachometer
1 x Hall Proximity Switch
1 x Round Magnet
1 x Cable

Notice:
1. Connect the plug correctly according to the wiring diagram.
2. The Hall switch is an NPN normally open type, and the detection distance of the Hall switch needs to be within 10 mm. The Hall switch is installed with a diameter of 12 mm and a wire length of 1m or less.
3. Avoid strong electromagnetic interference, the measurement wire is best to use shielded wire or twisted pair wire.
4. The counter and the clear input switch or circuit should be as close as possible to the terminals of the counter to make the line as short as possible.
5. Avoid the same tube or stranded wiring with strong electric wires or power wires to avoid unnecessary interference. If necessary, please use shielded wires, and the shielding layer is connected to the counting terminal +.
6. It is not recommended to use mechanical switches or micro switches, because their life is relatively short, it is easy to miscount after a long time; if using mechanical switches or micro switches, please try to use better quality one, so as not to m
7.Please note that the new type and old type of this product
ProductSiteLaunchDate : 2024-04-09T21:02:13.988Z
Size : speedometer
Style : Speedometer
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41110000