Cart 2 india

Specification
Brand : Duda Energy
BulletPoint1 : 240 Gallon Capacity
BulletPoint2 : Chemical Resistant MDPE with U.V. inhibitors
BulletPoint3 : Maximum Continuous Use Temperature: 140°F (60°C), Max Fluid Specific Gravity: 1.7
BulletPoint4 : 1.5" NPT Female Full Drain Port (No bulkhead, allows complete draining)
Capacity : 909 liters
ExternallyAssignedProductIdentifier1 : 840194123679
ExternallyAssignedProductIdentifier2 : 0840194123679
ExternallyAssignedProductIdentifier3 : 00845271014376
ItemDisplayDimensions_Length : 42 inches
ItemDisplayWeight : 75 pounds
ItemName : 240 Gallon Full Drain Cone Bottom Inductor Tank (No Stand)
ItemPackageDimensions_Height : 0.25 inches
ItemPackageDimensions_Length : 24.5 inches
ItemPackageDimensions_Width : 18.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-tanks-and-reservoirs
ItemVolume : 240 gallons
Manufacturer : Den Hartog Industries
Material : MDPE
ModelNumber : c240
NumberOfItems : 1
PartNumber : c240
ProductDescription : Inductor / Cone Bottom Tanks Full-Drain - Drains Completely and Evenly by Duda Energy. Inductor Tanks are selected as supply tanks for application systems and when a more complete drain out of stored liquids is required in indoor or outdoor applications. Tanks require stands to support the conical bottoms. Tanks are manufactured from medium-density polyethylene with U.V. inhibitors and designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators.These tanks can be used for a variety of purposes. Some examples would be biodiesel processing, water treatment, oil settling and many other applications which require a chemical resistant material and a cone shaped bottom for easy and full draining. Conical bottoms are ideal for even draining. These tanks are essential when settling materials suspended in a fluid, as they will sink to the very bottom and become fully drainable unlike in flat bottom tanks. Full drain ports allow for complete draining of the bottom. Tanks which use bulkheads in the bottom often leave residue in the bottom, which may not be acceptable especially int he case of a biodiesel processor where the washing is done in the processing tank. These tanks should not be pressurized. They are warrantied to handle no more than 2 psi. They cannot be used in a vacuum application. The lids on the tank are not sealed with gaskets so if pressure build-up occurs, it can be relieved automatically through the point of contact between the lid and the top of the tank. The larger tanks come with an air vent in the top which will pop up and allow relief of pressure. It may also be manually popped open if ventillation is required.
ProductSiteLaunchDate : 2011-08-02T02:24:40.517Z
Size : 240 Gallon
StreetDate : 2017-05-15T00:00:01Z
Style : Tank Only
UnitCount : 1
UnspscCode : 41000000