Cart 2 india

Specification
Brand : Martin
BulletPoint1 : Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
BulletPoint2 : Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
BulletPoint3 : Class 30 gray cast iron for resistance to wear, galling, and corrosion
BulletPoint4 : Keyed to the shaft to prevent the shaft from rotating in the bushing
BulletPoint5 : Interchangeable with taper bushings from various manufacturers
ExternallyAssignedProductIdentifier : 4680708372225
ExternallyAssignedProductIdentifier1 : 697950036960
ExternallyAssignedProductIdentifier2 : 0697950036960
ExternallyAssignedProductIdentifier3 : 00697950036960
IncludedComponents : (3) Cap Screws
ItemName : Martin 7060 7 Taper Bushing, Class 30 Gray Cast Iron, Inch, 7" Bore, 10.25" OD, 6" Length
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 10.25 inches
ItemPackageDimensions_Width : 10.25 inches
ItemPackageQuantity : 1
ItemTypeKeyword : taper-lock-locking-bushings
Manufacturer : MARTIN
Material : Cast Iron
NumberOfItems : 1
PartNumber : 7060 7
ProductDescription : BX1-15/16-A Split Taper Bushing, Bushing Type Split Taper, Bore Diameter 1 15/16 in, Length 1.938 in, Bolt Circle Diameter 3.13 in, Bolt Size Not Applicable, System of Measurement Inch, Bushing Diameter 2.625 in, Fastener Tightening Torque Capacity 192 in-lb, Flange Type Solid, Flange Width 1/2 in, For Shaft Type Keyed, Includes (3) Cap Screws, Keyway Height 1/4 in, Keyway Width 1/2 in, Length Less Flange 1.438 in, Material Steel, Overall Diameter 3.688 in, Taper 3/4 in Per ft
ProductSiteLaunchDate : 2010-11-10T08:00:01.000Z
SupplierDeclaredDgHzRegulation : not_applicable