Cart 2 india

Specification
Brand : Hegebeck
BulletPoint1 : 【DIMENSION】-Cutting edge diameter:2.4 mm / 0.09 inch;Shank diameter:3.175 mm / 1/8 inch;Cutting edge length:12 mm / 0.47 inch;Total length:38 mm / 1.5 inch
BulletPoint2 : 【MATERIAL】-The spiral milling cutter is made of carbide that is very tough,resists wear and offers high cutting performance
BulletPoint3 : 【INSTRUCTION】-Carbide can be used on mild steel as well as tool steel;Carbide has almost no flex so and requires that your work must be held rigidly so as not to break the tool;Cutting slots will require a mill or at the very least a compound table mounted to a drill press
BulletPoint4 : 【NOTE】-Carbide end mills can effectively cut almost any material but they cannot withstand any perceived deflection without breaking;So cut speed and feed must be carefully controlled to avoid cutter failure
BulletPoint5 : 【APPLICATION】-Fast chip-removal volume and speed,non-stick with bits;Suitable for composite multilayer board,hard wood,acrylic
Color : 5 Pcs
ItemName : Hegebeck Spiral End Mill Engraving Milling Cutter 2.4mm Carbide Router Bits for Wood Cutting and Carving with 1/8 Inch Shank 5 Pcs
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : tapered-end-mills
Manufacturer : Hegebeck
Material : Tungsten Carbide
ModelNumber : GU6700X2101MU-FBA
PartNumber : GU7700X2101MU-FBA
ProductDescription : Hegebeck Spiral Milling Cutter

Specifications:
Material:Cemented Carbide
Cutting edge diameter:2.4 mm / 0.09 inch
Shank diameter:3.175 mm / 1/8 inch
Cutting edge length:12 mm / 0.47 inch
Total length:38 mm / 1.5 inch

Description:
1.Made from carbide material,with sufficient strength and wear resistance good milling properties to ensure efficient work.
2.Work perfect on milling or cutting machines.Applicable machine tools:engraving machine, precision engraving machine, etc.
3.If you work primarily with plastic or aluminum, you’ll be happy to learn that heat is dispersed more easily with the spiral bit,the cuts are cleaner and chips are easily directed up or down, depending on the type of spiral you choose.

Package Content:
5 x Spiral Milling Cutters

NOTE:
1.Please check the specification and the number you need before buying.
2.Please put the cutter in a place where children can’t reach in case of accidents.

ProductSiteLaunchDate : 2021-07-14T10:06:10.202Z
Size : 2.4 mm
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 23241600