1. Output short circuit protection. 2. Dual input charging protection (batteries and the control board both equipped with shutdown、over current and over charging&discharging protection). 3. Unload protect. 4. During usage, if the power supply is overloaded, it will stop working for 3 seconds and then return to normal. It will not shut down automatically.
Instruction Manual 1. Press and hold the power button 3seconds to turn on/off the power. 2. Tap the power button once to switch the voltage. Click the power button to adjust the voltage 6 7 8 9 11 V. 3. It will shift to display the capacity of battery without working over 2s, and the indicator light is on the breathing state,the five indicators represent for 20%- 100% of the power capacity,Click the button return to voltage display. 4. The indicator light is blinking during charging, stop blinking with the overshoot protection working when full charged 5. Low power reminder: During usage, when the battery is dead (that is, the voltage is less than 3.3V), the power supply will automatically shut down. If the indicator light marking 20% power flashes, this means it is about to shut down automatically. 6. The pack capacity is 1050mAh. 3.5-4hours to be full charged at above 1A charger,about 6 hours working at 8V. 7. This pack is only for rotary machines but coil machine. 8. Don't use this pack while charging. ProductSiteLaunchDate : 2022-08-26T10:20:39.972Z SpecificationMet : CE, RoHS Style : Traditional UnspscCode : 53131800