Cart 2 india

Specification
Brand : Aramox
BulletPoint1 : [Reliable temperature control] Keep the connection until the target temperature is reached.
BulletPoint2 : [Strong ] handles up to 220VAC 1.5A or 24VDC 1.5a for reliable operation.
BulletPoint3 : [Improved security] has an isolation of more than 50 mohm for tranquility.
BulletPoint4 : [Stable and precise] offers constant performance in a compact design.
BulletPoint5 : [Versatile] for the power supply, the test equipment, the cooling and more.
Color : #526
ExternallyAssignedProductIdentifier : 7320560231656
IncludedComponents : No
ItemName : Control Switch Small Size Weight Temperature Control Normally Closed Switch for Cooling, Air Conditioning, 1 X for Test Equipment (D115℃)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : temperature-controllers
Manufacturer : Aramox
ModelName : Aramoxw0e3dprk2q-26
ModelNumber : Aramoxw0e3dprk2q-26
NumberOfItems : 1
PartNumber : OVAQUIXIptbry93fgs
ProductDescription : 1. The switch is a normally closed switch. The connection will not be disconnected until the temperature standard is reached, otherwise it will connect
2. The can withstand the 220VAC 1.5A or 24VDC 1.5A voltage.
3. More than 50 mohm at room temperature and humidity of insulation , safer.
4. Durability-Optimized, high , small size, light weight.
5. Suitable for food supply, test equipment, cooling, air conditioning, printed circuit plate.
6. High reliability, long life and little interference to the radio.

Speculation:
Type: Switch
Type: Normally closed
Temperature range: 40 ~ 130 ℃
load: 220VAC 1.5A or 24VDC 1.5A
Insulation : normal temperature and humidity ≥50mΩ
: ≤ 100 mΩ
ELECTRICAL : ≥500 Vac
Temperature: D40 ℃/ d45 ℃/ d50 ℃/ d55 ℃/ d60 ℃/ d65 ℃/ d70 ℃/ d75 ℃/ d80 ℃/ d85 ℃/ d90 ℃/ d95 ℃/ d100 ℃/ d105 ℃/ d110 ℃/ d115

Packagelist:
1 x switch

Note:
1. When using temperature detection, the metal cover must be close to the mounting surface of the controlled system. To guarantee the temperature detection effect, the temperature sensitive surface must be covered with thermal fat or other similar heat transfer means.
2. Do not crush, loosen or deformed the upper part of the cover during installation to avoid affecting performance.
3, cannot let the liquid penetrate the temperature controller, do not break the housing, do not arbitrarily change the shape of the external terminal.
4. The product must be used in a circuit with a current of no more than 5a. The copper nucleus should be selected from 0. Cable connection 5-1 mm2; If the circuit is not more than 10a, the copper nucleus should be 0.75-1.5 mm2. connection.
5. The product must be stored in a warehouse with a relative humidity of less than 90% and an ambient temperature of 40 ° C below, which is ventilated, clean, dry and of corrosive gases.
ProductSiteLaunchDate : 2025-05-08T16:39:51.607Z
Size : D115℃
Style : D115℃
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41112209