Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : Hilitand
BulletPoint : PID Digital Controller REX-C100FK02-M*AN 0 To 400°C K Type O6P4
BulletPoint1 : Digital Thermal Fan Switch for 0444: Fan switch kit can be used in 12 or 24 volt applications(if you intend to operate 24V fans you will need to purchase standard 24V relays.)
BulletPoint2 : Temperature Range: The electric fan controller kit adjustable temperature range is 104℉ to 230℉(40℃ to 110℃), and can display Celsius or Fahrenheit degrees. The temperature is set by pressing the set button. (LED digital temp display, actual temp and set temp.)
BulletPoint3 : Work Speed: The adjustable fan controller set can operate 1 or 2 fans. The second fan(if applicable) will start after 10 seconds of fan 1 work. Operate in a hot manner, and also when the air conditioning is running. Circuit type is pre programmed micro controller
BulletPoint4 : Stable Performance: Digital heat sink fan switch kit is made of standard material, wear resistant and long lasting. Professional manufacturing bring long service life. Size is 3.75in x 2.6in x 2.2in. Suitable for single and dual fan applications
BulletPoint5 : Installation Tips: The dual electric fan controller kit as supplied with a sensor designed to be placed between the vehicles heat sink fins, an adapter kit is required to allow the sensor to be fitted into a coolant hose
Color : 24v Wall Mounted
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7619703131831
ExternallyAssignedProductIdentifier1 : 621572861945
ExternallyAssignedProductIdentifier2 : 0621572861945
ExternallyAssignedProductIdentifier3 : 00793950482810
IncludedComponents : No
ItemName : Temperature Digital Fan Controller Kit Dual Relays 12V for Single and Dual Fan Applications LED Display for Hot Operation with Air Conditioning
ItemPackageDimensions_Height : 9 centimeters
ItemPackageDimensions_Length : 24 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : temperature-controllers
Manufacturer : Hilitand
ModelName : OPPWONGemyxgw63z2
ModelNumber : Hilitandymk79awefg
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Hilitandymk79awefg
PowerSourceType : Battery Powered
ProductDescription : Specification:
Item Type: Digital Fans Controller
Material: ABS
Voltage: 12V
Maximum Touch Current: 40A
Coil Resistance: 90Ω
Relay Setting: Dual relay
Sensor Wire Total Length: Approx. 142cm / 55.9in(switch wire approx. 112cm / 44.1in + sensor connector approx. 30cm / 11.8in)
Speed: Single speed, second fan start 10 seconds after
Application: For single and dual fan applications
Screen Display: LED digital temperature display, actual temperature + set temperature
Temperature Display: Celsius or Fahrenheit
Temperature Setting: 40℃ to 110℃(104℉ to 230℉)
Temperature Setting: Key
Circuit Type: Pre programmed microcontroller
Size: Approx. 9.5 x 6.6 x 5.6cm / 3.75 x 2.6 x 2.2in

How to Use:
1. Place the temperature sensor on the heat sink fins, as close to the coolant inlet as possible. It senses the air temperature as it passes through the heat sink, with a temperature range of 40℃ to 110℃(104℉ to 230℉).
2. Water/Coolant Application
PackageList:
1 x Digital Fan Controller
2 x Screws
2 x Terminals
2 x Terminal Protectors
3 x Washers
2 x Adhesive Pads
3 x Accessories

Note:
If this switch is used for EWP, it will not change the pump speed based on engine temperature but will turn the pump on and off at your set temperature. For EWP control, we recommend using part number 8002, which can manage for EWP and your thermostatic fan.
ProductSiteLaunchDate : 2024-08-28T17:26:34.227Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26000000