Cart 2 india

Specification
Brand : HangTon
BulletPoint1 : M12 A Coding 8 Pin Actuator Sensor Signal Cable
BulletPoint2 : Connector aviation M12 A-coded 8 pin male to 8 pin male, shielded, solid and smooth connection
BulletPoint3 : The 8-pin connector metal shell is connected to cable shielded layer for protecting against electrical interference
BulletPoint4 : Length 3 meter. 24AWG 8-conductor shielded wire PVC jacket
BulletPoint5 : for Sensor, Industrial Controls Automation, Device Network DeviceNet, CANopen, IO link, Profibus
CompatibleDevices : Scanner
ConnectorGender : Male-to-Male
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier : 6420158928201
ExternallyAssignedProductIdentifier1 : 0027685162724
ExternallyAssignedProductIdentifier2 : 027685162724
ExternallyAssignedProductIdentifier3 : 00801279630659
FitType : Vehicle Specific
IncludedComponents : 10Pcs NTC MF52D
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : HangTon M12 A Coding 8 pin Male to 8 pin Male Signal Cable for Industrial Controls Automation, Device Network, IO Link, Profibus, Actuator Sensor 3M
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : industrial-temperature-sensors
Manufacturer : HangTon Connect
Material : Copper
Material1 : epoxy
Material2 : epoxy
Material3 : resin
MeasurementAccuracy : ±1%
ModelName : Banks Power - iDash 1.8 DataMonster / Supergauge 3 Pin Connector Temperature Sensor RTD/PT200 (63065)
ModelNumber : N.A.
MountingType : Flange Mount
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : M12 cable
ProductDescription :

This are 3 pieces Digital Temperature Sensor Shield with 1-Wire Interface for WEMOSD1 Mini applications to measure temperatures between -55 and +125 degrees Celsius.

Libraries for this sensor type and different programming environments, for example for Arduino or Raspberry, are available and easy to find.

A temperature alarm condition can be programmed right in the sensor (nonvolatile).

Every sensor element comes with a unique, digital serial number. Therefore, multiple sensors can be connected to the same 1-Wire interface.

– voltage supply 3.0 to 5.5V DC
– operating current ca. 1.5mA
– standby current ca. 3uA
– transmission current 1mA/4mA (logic 1/0)

For more information please refer to DS18B20 datasheet.

ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2022-09-29T09:05:00.959Z
Size : 3m
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43202222
WarrantyDescription : Manufacturer’s Warranty