Cart 2 india

Specification
Brand : ElectronicMaker
BulletPoint : MAX31855 MAX6675 Module K Type Thermocouple Temperature Sensor Breakout Board Temperature Measurement Module 3-5V DC
BulletPoint1 : Product type: NTC 10K / B3470 1% ; High-accuracy temperature sensor probe
BulletPoint2 : Epoxy waterproof probe, 4mm x 13mm Size
BulletPoint3 : 20cm(7.87-inch) wire length, XH2.54-2P plug
BulletPoint4 : Mainly used in air conditioner for measuring and controlling temperature, fast temperature conduction.
BulletPoint5 : Widely Application in air conditioners, refrigerators, freezers, heater, etc.
ExternallyAssignedProductIdentifier : 5202036903019
ItemName : MAX31855 MAX6675 Module K Type Thermocouple Temperature Sensor Breakout Board Temperature Measurement Module 3-5V DC
ItemPackageDimensions_Height : 40.2844 centimeters
ItemPackageDimensions_Length : 7.493 centimeters
ItemPackageDimensions_Width : 10.0076 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-temperature-sensors
Manufacturer : ElectronicMaker
Material : Copper
ModelNumber : a20113000ux0447
NumberOfItems : 1
PartNumber : HYSYMo-10970
ProductDescription :
1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.
2.This protuct does everything for you, and can be easily interfaced with any microcontroller,
even one without an analog input.
3.This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry,
4.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any
breadboard or perfboard).


Description

1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero
2. SPI interfaces, high-speed transmission
3. the input voltage is 3-5v DC
4. direct digital output temperature value, no amplifiers, no ADC
5. 14-bit resolution, 0.25 degree temperature accuracy


Note

1.Works with any K type thermocouple
2 K thermocouples have about ±2°C to ±6°C accuracy
4.Internal temperature reading
5.3 to 5v power supply and logic level compliant!
6.SPI data output requires any 3 digital I/O pins.


ProductSiteLaunchDate : 2021-04-24T17:58:05.455Z
Style : 10K
SupplierDeclaredDgHzRegulation : not_applicable