Cart 2 india

Specification
Brand : V TELESKY
BulletPoint1 : The lead end of the product should be able to withstand a tensile force greater than or equal to 20N, and the wire should not break or slide out.
BulletPoint2 : 1. The product should be able to withstand AC660V between the leads when disconnected for 1 minute without any breakdown or flashover phenomenon,
BulletPoint3 : 2. The product lead can withstand AC1800V between the insulation shell for 1 second without any breakdown or flashover phenomenon;
BulletPoint4 : Under normal conditions, the insulation resistance between the lead and the insulating shell is above 100M Ω. (The meter used is a DC500V megohmmeter)
BulletPoint5 : The contact resistance of the product should not exceed 50m Ω. The high-temperature test product is placed in an air environment above the rated operating temperature of 50 ℃ for 96 hours
ExternallyAssignedProductIdentifier : 4894927067736
ExternallyAssignedProductIdentifier1 : 0808238553950
ExternallyAssignedProductIdentifier2 : 808238553950
ItemDisplayWeight : 1 pounds
ItemName : V TELESKY 5PCS KSD9700 5A Normally Open Thermostat Thermal Temperature Switch Protector Fuses 15-80 Degree (50)
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-temperature-sensors
Manufacturer : V TELESKY
Material : lead
ModelNumber : P2RH-LF
MountingType : Flange Mount
NumberOfBoxes : 1
NumberOfItems : 2
PackageLevel : unit
PartNumber : 4063415142703933
ProductDescription : Attention: The temperature control switch has a reset temperature.

Normally closed: After disconnection, it needs to be lowered to the reset temperature before restarting

Normally open: After being connected, it needs to be lowered to the reset temperature before it can be reconnected

Example: Normally open at 40 degrees Celsius, after the temperature exceeds 40 degrees Celsius, everything is connected and needs to be reset at around 20 degrees Celsius. Only below 40 degrees Celsius is disconnected (if the reset temperature is not reached, everything below 40 degrees Celsius is also connected)



Tensile test:

The lead end of the product should be able to withstand a tensile force greater than or equal to 20N, and the wire should not break or slide out.

Insulation voltage:

1. The product should be able to withstand AC660V between the leads when disconnected for 1 minute without any breakdown or flashover phenomenon,

2. The product lead can withstand AC1800V between the insulation shell for 1 second without any breakdown or flashover phenomenon;

Insulation resistance:

Under normal conditions, the insulation resistance between the lead and the insulating shell is above 100M Ω. (The meter used is a DC500V megohmmeter)

Contact resistance:

The contact resistance of the product should not exceed 50m Ω. The high-temperature test product is placed in an air environment above the rated operating temperature of 50 ℃ for 96 hours
ProductSiteLaunchDate : 2024-04-02T03:49:58.802Z
Style : 50
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 5
Voltage : 1800 volts