Specification Brand : Tyenaza BulletPoint1 : The switch is a normally open switch,connect only when temperature standard is reached, otherwise disconnect. BulletPoint2 : The contacts can withstand 220VAC 1.5A or 24VDC 1.5A voltage. BulletPoint3 : High insulation resistanc e more than 50MOhm in ambient temperature. BulletPoint4 : Stable performance, high accuracy, small size, light weight. BulletPoint5 : High reliability, long life, and little interference to the radio. Color : #423 ExternallyAssignedProductIdentifier : 9582728814097 IncludedComponents : No ItemName : Tyenaza Thermostat Switch, Temperature Control Normally Opened Switch Thermostat Switch 40~130℃ (100℃) ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 4 centimeters ItemPackageDimensions_Width : 2 centimeters ItemTypeKeyword : thermostat-controllers Manufacturer : Tyenaza ModelNumber : Tyenazagqkrgdx5sa-23 NumberOfItems : 1 PartNumber : Tyenazagqkrgdx5sa-23 ProductDescription : Item Type:Switch Type: Normally Opened Contacts Load: 220VAC 1.5A or 24VDC 1.5A Insulation Resistanc e: Normal Temperature And Humidity 50MΩ Temperature: 40℃ / 45℃ / 50℃ / 55℃ / 60℃ / 65℃ / 70℃ / 75℃ / 80℃ / 85℃ / 90℃ / 95℃ / 100℃ / 105℃ / 110℃ / 115℃ / 120℃ / 125℃ / 130℃(Optional) Contacts Resistanc e: 100 MΩ Electric Strength: 500VAC
Package List: 1 x Switch Note: 1. When using contacts temperature sensing, the metal cover should be close to the mounting surface of the controlled appliance. To ensure the temperature sensing effect, the temperature sensitive surface should be coated with thermal grease or other similar heat transfer medium. 2. Do not crush, loosen or deform the top of the cover during installation to avoid affecting performance. 3, can not let the liquid penetrate into the temperature controller, do not crack the shell, do not arbitrarily change the shape of the external terminal. 4. The product should be used in a circuit with a current of no more than 5A. The copper core should be selected from 0. 5-1mm2 wire connection; if the circuit is not more than 10A, the copper core should be 0.75-1.5mm2. connection. 5. The product should be stored in a warehouse with a relative humidity of less than 90% and an ambient temperature of 40 ° C below, which is ventilated, clean, dry.