Cart 2 india

Specification
Brand : Cherish XT
BulletPoint1 : Range: 0-25μm,0-50μm,0-100μm
BulletPoint2 : The scraper fineness meter is mainly used to measure the fineness of pigments and impurity particles in coatings, paint pastes, inks and other liquids and pastes, so as to control the quality of dispersed products in production, storage and application, such as paint, plastic, pigment, printing ink, paper, ceramic medicine, food and other fields.
BulletPoint3 : How to choose--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, When the product fineness is below 20um, the scraper fineness meter with a range of 0-25um is used. When the product is below 30um, a scraper fineness meter with a range of 0-50um or 0-100um is used.
BulletPoint4 : Reading unit: μm--Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
BulletPoint5 : Use and read--Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
Color : 0-100μm
ExternallyAssignedProductIdentifier : 7415232921154
ExternallyAssignedProductIdentifier1 : 049659531718
ExternallyAssignedProductIdentifier2 : 0049659531718
IncludedComponents : Caliper
ItemDisplayDimensions_Height : 12 millimeters
ItemDisplayDimensions_Length : 155 millimeters
ItemDisplayDimensions_Width : 50 millimeters
ItemDisplayWeight : 1.2 kilograms
ItemName : 0-100μm Grindometer Gauge Single Groove Stainless Steel Fineness Gage Gauge Single-Channel Grind Fineness Gauge Gage 0-25μm,0-50μm,0-100μm Available (0-100μm)
ItemPackageDimensions_Height : 9.144 centimeters
ItemPackageDimensions_Length : 58.674 centimeters
ItemPackageDimensions_Width : 26.67 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thickness-gauges
Manufacturer : FZYQ
Material : Stainless Steel
ModelName : Kavoletwktesmv380
ModelNumber : 1150Z-8
NumberOfItems : 1
PartNumber : 01
ProductDescription : Instructions

1. When using, first wash the scraper and bottom with solvent, and dry with cotton yarn.
2. After mixing the sample to be tested, place it in the deepest groove of the fineness meter to fill the groove.
3. Then hold the spatula with the index finger and middle finger of both hands. Place it horizontally on the upper end of the scraper
fineness meter, make the scraper perpendicular to the surface of the scraper fineness meter, and pull the scraper from the deep part of
the groove to the shallow part at an appropriate speed, so that the paint sample fills the groove without leaving excess on the flat
plate (Paint, no more than 5 seconds after scraping) Immediately pinch the fineness meter and tilt it so that the line of sight is 15-30
degrees from the plane of the groove. Observe the scale value of the uniformly exposed particles in the groove. The fineness of the measured object.

How to choose scraper fineness meter

Single groove refers to a scraping sample groove, select a fineness gauge that is 5-10um higher than the fineness range of the product
you measure. When the product fineness is less than 20um, use a spatula fineness meter with a range of 0-25um. When the product is
less than 30um, use a scraper fineness meter with a range of 0-50um or 0-100um.

Included items

A board
Two scrapers
A box
Instructions
Product certification

Repair and maintenance

1. Neither the surface of the scraper nor the crossing of the scraper should be bumped.
2. Wash and apply anti-rust oil after use.
3. Check the straightness of the scraper and knife edge regularly for one year, and repair it in time if it does not meet the standard.
4. This instrument is suitable for ensuring accuracy under the conditions of room temperature 22±1℃ and relative humidity of 70%.

ProductSiteLaunchDate : 2020-06-23T09:03:02.281Z
Range : 8"
Resolution : 0.0001"
Size : One Size
Size1 : 8 to 10.9 Inches
Size2 : 6 to 7.9 Inches
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25191800