Cart 2 india

Specification
Brand : BAOSHISHAN
BulletPoint1 : [0-100μm, INDEX VALUE 5μm]--We have four kinds of single groove grindometer: 0-25μm, 0-50μm ( index value is 2.5μm) 0-100μm, 0-150μm ( index value is 5μm). Single Fineness gauge, with a spatula, stainless steel by forging (4Cr13) is made with a certain slope of the groove. Scale in microns (μm), the accuracy of fineness plate grooves ± 1μm.
BulletPoint2 : [USING AND READING]--Put some particles on the deeper groove, then use scraper to scrape them from deeper to low groove. Immediately (not over 5 seconds) observe the tick mark of grain visible in the channel, this numerical value is the fineness.
BulletPoint3 : [READING UNIT: μm]--Correspondence between micron and hegman as follows: 0 hegman=100 um 4 hegman=50 um 8 hegman=0 um
BulletPoint4 : [HOW TO CHOOSE GRINDOMETER]--Choose a fineness gauge 5-10um higher than the product fineness range you measured. Single groove means only only one scraper groove, double grooves refer to two scraping grooves, which are convenient for comparison.
BulletPoint5 : [NOT ONLY FOR PAINT]--Fineness gauge can measure not only the fineness of paint, but also the fineness of coatings, pigments, raw materials, plastics, printing ink and so on. In chocolate, ceramics, paper, medicine, food and other industries, it is also possible to use single groove grinding fineness design for fineness detection.
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6013040047229
ExternallyAssignedProductIdentifier1 : 701936207791
ExternallyAssignedProductIdentifier2 : 0701936207791
ItemName : BAOSHISHAN 0-100um Grindometer Stainless Steel Fineness Gauge ISO Standard Single Groove with 2 Scrapers, Storage Case, 25μm/50μm/100μm/150μm Available (100μm, 8Hegman)
ItemPackageDimensions_Height : 21.0058 centimeters
ItemPackageDimensions_Length : 5.207 centimeters
ItemPackageDimensions_Width : 18.2118 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thickness-gauges
Manufacturer : BAOSHISHAN
Material : Plastic
ModelNumber : M-463
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : M-463
ProductDescription : From the research laboratory coatings and inks, to test the production process, in order to obtain reliable and reproducible recipe a critical measurement technique is material particles (including paint or other similar material) for fast and accurate size measurements. We are very strict production standards, ensuring the production of all fineness board can maintain high quality and high accuracy to achieve and meet a variety of industries involved in the grinding process, especially in the wet-powder-paints, varnishes, printing inks and cosmetics industries requirements. The fineness meter is made of forged stainless steel with a sloping groove. Scale in microns (um), Hagemeyer (Hegman), mil (MILS), the accuracy of fineness plate grooves ±1μm. Correspondence between micron, mil and Hagemeyer as follows: 1 mil = 25.4 um, 1 um = 0.001 mm, 0 Hegman = 4 mil / 100 um 4 Hegman = 2 mil / 50 um 8 Hegman = 0 mil / 0 um *Hagemeyer (Hegman) is usually represented by a capital "H".
ProductSiteLaunchDate : 2014-06-26T07:00:00.000Z
Size : 0-100um
SupplierDeclaredDgHzRegulation : not_applicable