Cart 2 india

Specification
Brand : GENERIC
BulletPoint : THIS IS A NEW OLD STOCK NEVER USED M4 X 0.7 D6 HSS THREAD FORMING BOTTOM TAP
BulletPoint1 : 【Tap Size】Length: 2.60"/66.00mm, Thread Head: 0.75"/19.00mm, Square Head: 4.5mm x 4.5mm (L*W), Shank Diameter:5.6mm, Pitch: 0.5mm.
BulletPoint2 : 【Die Size】OD: 0.98"/25mm, Thick: 0.27"/6.8mm.
BulletPoint3 : 【application】Make or repair thread, suitable for most metals, copper, alloy steel, cast iron, aluminum, brass, abrasive steel, A3 steel, iron plate ETC.
BulletPoint4 : 【Usage】Can be used with manual equipment or special processing consoles for tapping, Appropriate addition of coolant can extend the service life when tapping.
BulletPoint5 : 【Package Include】1 pc M7.5 x 0.5mm Metric Tap & 1 pc M7.5 x 0.5mm Metric Round Die.
GpsrSafetyAttestation : 1
ItemDisplayWeight : 1.06 ounces
ItemName : M4 X 0.7 D6 HSS Thread Forming Bottom TAP
ItemPackageDimensions_Height : 12.8016 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 10.8966 centimeters
ItemTypeKeyword : thread-forming-threading-taps
Manufacturer : GTD
Material : high_speed_steel
MeasurementSystem : Metric
PartNumber : D-2-4-7-3-LN
ProductDescription : Cutting Direction: Right Hand.
Tap Material: High Speed Steel.
Die Material: Alloy Tool Steel.

Straight Flute Thread Taps
Straight flute design, used for through hole and shallow blind hole tapping, not for blind hole tapping.
Easy to Use
it can be used with manual equipment or special processing consoles, such as tapping machines, drill-in-one bench drills, CNC lathes, machining centers, etc.
Control the speed according to the hardness of the material. The higher the hardness of the processed product, the slower the speed.
Recommended feed rate: General steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.

Round Thread Die
Round dies are suitable for general purpose threading, widely used in thread repair or cleaning the external thread.

Tips
1. Before tapping confirm whether the diameter of the round hole is appropriate, and to take protective measures when working.
2. When tapping, it is necessary to add water or coolant to cool down to prevent excessive temperature and reduce tap loss. If it encounters difficulty in rotation, the tapping should be suspended.
3. Be sure to select the appropriate cutting oil for the complex tapping process and apply anti-rust oil for maintenance after use.
ProductSiteLaunchDate : 2025-02-18T02:49:07.690Z
Size : M7.5x0.5mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 20121600